Read Sharp LL-T19D1 Service Manual online
LL-T19D1
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-3. Turning the power on
1.
Turn on the main power of the monitor.
• When switching the main power switch on and off, always wait for an
interval of at least 5 seconds. Rapid switching may result in malfunc-
tion.
2.
Press the monitor's POWER button.
The power LED will light up orange.
The power LED will light up orange.
3.
Turn on the computer.
When a signal is input from the computer, the power LED lights up
green, and the screen is displayed. (After power is turned on, it may
green, and the screen is displayed. (After power is turned on, it may
take a little time until the screen is displayed.)
• If the input terminal to which the computer is connected has not
been selected, the screen will not be displayed. If necessary, per-
form input terminal switching.
form input terminal switching.
Notes:
• When using an analog signal, perform an automatic screen adjust-
ment under the following conditions:
– Using the monitor for the first time.
– After having changed the system settings during use.
• Depending on the computer or OS, it may be necessary to use the
computer to install monitor set-up information.
• When connecting to a notebook, if the notebook computer's screen is
set so that it is displaying at the same time, the MS-DOS screen may
not be able to display properly. In this case, change the settings so
that only the monitor is displaying.
1-4. Changing between input terminals
Use the INPUT button to switch between signal input terminals.
1-5. Turning the power off
1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
Main power switch
Press power button.
Turn on the computer
power supply.
ON
Analog RGB input terminal 1
Analog RGB input terminal 2
DVI-D input terminal
INPUT
INPUT
INPUT
INPUT-1 ANALOG
INPUT-2 ANALOG
INPUT-3 DIGITAL
Press power button.
Turn the computer
off.
OFF
Click on the first or last page to see other LL-T19D1 service manuals if exist.