LL-T19D1 - Sharp Monitor Service Manual (repair manual). Page 8

LL-T19D1

CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS

2 – 4

7) Version display (for service)

While pressing

, turn on

the power.

•  Valid even when there is no input signal.

•  The Model name version, the date, H-SYNC, V-SYNC and check

sum are displayed.

•  When

is pressed, the version display disappears.

• All the keys except for

and the power key are dis-

abled.

•  The version display keeps ON until

or the power key

is pressed.

6) Aging (for service)

While pressing

, turn on

the power.

•  When the selftest is executed, no menu is shown.

•  When the selftest is executed, the display shows Red 

3

 Green

3

 Blue 

3

 Yellow 

3

 Purple 

3

 Light Blue 

3

 White 

3

 Black

repeatedly.

•  When the selftest is executed, all the keys except for the power

key are disabled.

•  Turn off the power to terminate the selftest.

•  When the signal is inputted, the screen inputted is displayed and

it does not entry into aging mode.

MENU

MENU

MENU

4)   Adjusting the backlight

buttons

5)   Setting display mode

button (STD, OFFICE, sRGB, VIVID)

1)   Resetting all adjustment values

Power ON

Power ON

Press the above two buttons at same time, and while turn the power on.

2)   ADJUSTMENT menu reset

Press the two buttons at same time.

3)   Adjustment lock function

6)  Screen adjustment

MENU

ADJUSTMENT
(Analog)

(Analog)

(Analog)

AUTO

CLOCK

PHASE

H-POS

V-POS

AUTO

MENU

GAIN CONTROL

BLACK LEVEL

CONTRAST

MENU

(COOL      STD   

WHITE BALANCE

  WARM    USER)

R-CONTRAST

CONTRAST
(R/G/B)

G-CONTRAST

B-CONTRAST

MENU

MODE SELECT

MENU

MENU

buttons

buttons

buttons

buttons

buttons

buttons

buttons

buttons

buttons

buttons

OSD H-POSITION

OSD V-POSITION

SCALING

buttons

buttons

buttons

LANGUAGE

buttons

END

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

/MODE

400 LINES

buttons

/MODE

/MODE

Valid even when there is no input signal.
When the above procedure is executed, key lock/release is changed over.
When key lock is set, the black display is shown and "ADJUSTMENT LOCKED" is displayed for about 2 sec.
When key release is set, the black display is shown and "ADJUSTMENT UNLOCKED" is displayed for about 2 sec.
When key lock is set, all the keys except for the power key are disabled.

e

d

c

 /MODE

MODEL NAME  :  LL-T19D1

VERSION : 

1.000

DATE : 

2/07/2003

CHECK SUM 

:  xxxx

H-SYNC. : 

X 

Hz

V-SYNC. : 

X 

kHz

MENU

MENU

MENU

c

 /MODE

e

MENU