Read Sharp LL-T19D1 Service Manual online
LL-T19D1
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■
■
■
■
Product specifications
• Model name
LL-T19D1-H (Frosty gray)/LL-T19D1-B (Black)
• LCD display
48 cm measured diagonally
TFT LCD module
TFT LCD module
• Resolution (max.)
SXGA 1280 x 1024 pixels
• Displayable colors (max.)
Approx. 16.77 million colors (8bit)
• Brightness (max.)
300cd/m
2
• Dot pitch
0.294 (H) x 0.294 (V) mm
• Contrast ratio
700 : 1
• Angle of visibility
Left-right 170°; Up-down 170° (contrast ratio
s
10)
• Screen display size
Horizontal 376.3 mm x Vertical 301.1 mm
• Video signal
Analog: Analog RGB (0.7Vp-p) [75
Ω
]
Digital: DVI standard based on 1.0
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL
level: +/-)
level: +/-)
• Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.)
• Plug & Play
VESA DDC2B compatible
• Power management
VESA: based on DPMS
DVI: based on DMPM
DVI: based on DMPM
• Input signal terminal
Analog: 15 pin mini D-sub (3 rows) x 2
Digital: 24 pin DVI-D x 1
Digital: 24 pin DVI-D x 1
• Screen tilt
Upward approx. 0° - 20°; downward approx. 0° - 5°
• Screen swivel
Approx. 90° from left through right (Turn table type)
• Power supply
AC100 - 240V, 50/60Hz
• Temperature of operating environment
5 - 35°C
• Power consumption
43W maximum, 2.8W when in power-saving mode
• Dimensions
Approx. 423 (W) x 222 (D) x 392 - 439 (H) mm
• Weight
Approx. 6.9kg (approx. 4.7kg excluding stand)
(Excluding signal cable.)
(Excluding signal cable.)
■
■
■
■
Dimensions (Units: mm)
• Analog signal cable: approx. 1.8 m
• Digital signal cable, NL-C01E (separately): approx. 2.0 m
■
■
■
■
Relevant signal timings (analog)
• Recommended resolution is 1280 x 1024.
• All are compliant only with non-interlaced.
• Frequencies for Power Macintosh and Sun Ultra series are reference
values. To connect, another adapter (commercially available) may be
required.
required.
• If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
• If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
Display mode
Hsync
Vsync
Dot
frequency
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
35.1kHz
56Hz
36.0MHz
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75MHz
1152 x 864
67.5kHz
75Hz
108.0MHz
1280 x 960
60.0kHz
60Hz
108.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
Power
Macintosh
series
Macintosh
series
640 x 480
35.0kHz
66.7Hz
30.2MHz
832 x 624
49.7kHz
74.6Hz
57.3MHz
1024 x 768
60.2kHz
75Hz
80.0MHz
1152 x 870
68.7kHz
75Hz
100.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
Sun
Ultra series
Ultra series
1024 x 768
48.3kHz
60Hz
64.13MHz
53.6kHz
66Hz
70.4MHz
56.6kHz
70Hz
74.25MHz
1152 x 900
61.8kHz
66Hz
94.88MHz
71.8kHz
76.2Hz
108.23MHz
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
81.1kHz
76Hz
134.99MHz
423
202
348
392
439
222
66
Click on the first or last page to see other LL-T19D1 service manuals if exist.