LL-T18A1 (serv.man2) - Sharp Monitor User Guide / Operation Manual. Page 9

6

5

4

3

2

1

7 8

11

11

11

10

9

1. INPUT button .............................. To switch between the signal's input terminals. (Analog RGB input

terminal 

↔ DVI-D input terminal)

2. MENU button ............................... This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3.

 button ...................................... This button is used to select menu options when the OSD Menu is

displayed.

4.

   buttons ................................ When the OSD Menu is displayed:

These buttons are used to select an option or adjust the value of
the selected option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness .

5. Power LED .................................. This LED is lit green when in use and orange when in power-saving

mode.

6. Power button
7. Power terminal
8. DVI-D input terminal ................... Use this when connecting to the computer's digital RGB output

terminal.
It can be connected to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and which has SXGA output
ability. (Depending on the computer to be connected, correct display
may or may not be possible.)
In order to connect, it is necessary to purchase a Digital signal
cable.(Model name: NL-C01E)

9. Analog RGB input terminal ......... Use this when connecting to the computer's analog RGB output

terminal.

10. Security lock anchor ................... By connecting a security lock (commercially available) to the security

lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.

11.Ventilation openings .................... Note: Never block the ventilation openings as this may lead to

overheating inside the monitor and result in malfunction.

02_LL-T18A1_gb.p65

12/12/2002, 7:27 PM

9