Read Sharp LL-T17D3 (serv.man10) Service Manual online
LL-T17D3-H/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-2. Connection of headphones
(commercially available)
Headphones (commercially available) can be connected.
Note: When the headphones are connected, no sound can be heard
from the monitor speakers.
1-3. Connecting the monitor to a power source
1.
Connect the AC adapter to the monitor's power terminal.
2.
Attach the power cord to the AC adapter and place the power plug
into the AC outlet.
into the AC outlet.
1-4. Turning the power on
1. Press the monitor's POWER button.
2. Turn on the computer.
The power LED will be lit green, and the screen will display an
image.
Note:
• When using an analog signal, perform an automatic screen adjust-
ment under the following conditions:
– Using the monitor for the first time.
– After having changed the system settings during use.
• Depending on the computer or OS, it may be necessary to use the
computer to install monitor set-up information. If so, follow the
steps below to install the monitor set-up information.
• When connecting to a notebook, if the notebook computer's screen
is set so that it is displaying at the same time, the MS-DOS screen
may not be able to display properly. In this case, change the set-
tings so that only the monitor is displaying.
1-5. Changing between input terminals
Use the INPUT button to switch between signal input terminals.
Note: When there is no input signal, [NO SIGNAL] is displayed.
1-6. Turning the power off
1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be sure to
unplug it from the AC outlet.
unplug it from the AC outlet.
Headphone
Headphone terminal
Power terminal
AC adapter
Power cord
AC outlet
Press power button
ON
Turn on the
computer
computer
INPUT-1
<ANALOG>
Analog RGB input terminal
DVI-I input terminal
INPUT-2
<
>
INPUT
The input signal type (ANALOG/DIGITAL) is displayed within
angle brackets < >.
angle brackets < >.
Press power button
OFF
Turn the
computer off
computer off
Click on the first or last page to see other LL-T17D3 (serv.man10) service manuals if exist.