Read Sharp LL-T17D3 (serv.man10) Service Manual online
LL-T17D3-H/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTION
Caution:
• When connecting, ensure that both the monitor and computer are
switched off.
• Be careful not to overly bend the cable or add extension cords as
this could lead to a malfunction.
1-1. Connecting the monitor to a computer
■
Connecting useing accessory analog signal cable
• Paying attention to connector direction, firmly insert the signal cable
to terminal, and then tighten the screws at both sides.
If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
signal cable.
■
When connecting using separately sold digital or analog
signal cables
The separately sold display cable enables connection between the DVI-
I input terminal on the display and the digital or analog RGB output ter-
minal of the computer.
minal of the computer.
When connecting to a digital RGB output terminal:
• Use a digital signal cable (model name: NL-C01E)
• For digital RGB connection, the monitor has an input for connecting
to a computer with a DVI-compatible output connector (DVI-D 24 pin
or DVI-I 29 pin) and SXGA output capability.
(Depending on the type of computer to be connected, the display may
(Depending on the type of computer to be connected, the display may
not work correctly.)
When connecting to an analog RGB output terminal:
• Use an analog signal cable (model name: NL-C02E).
• Paying attention to connector direction, firmly insert the signal cable
to terminal, and then tighten the screws at both sides.
Set the monitor as follows when establishing a digital connection with a
Power Mac using an ADC-DVI adapter made by Belkin. (Operation has
been checked with the Power Mac G4 M7627J/A)
• Perform settings with the Power Mac power supply off.
1. Connect the power cord.
2. Press the
e
button and
d
button simultaneously, and while doing
this press the POWER button (i.e. turn the power on).
3. Set to "ON" with the
e
d
buttons.
• Do not set to [ON] if you are not using a Belkin ADC-DVI adapter,
as this may result in incorrect display.
4. Press the MENU button.
This completes setting.
■
Connect the accessory audio cable
When the accessory audio cable is connected to the audio output termi-
nal of the computer, the sound of the connected computer is output
from the display speakers. You can also use the headphone jack of the
display.
Analog RGB terminal
(Mini D-Sub 15 pin, 3 row)
(Mini D-Sub 15 pin, 3 row)
Analog signal cable
Macintosh conversion adapter
RGB output terminal
Display cable (purchased separately)
DVI-I input terminal
MAC DIGITAL
INPUT-
OFF
ON
OK [MENU]
Audio input terminal
Audio output terminal
Audio cable
Click on the first or last page to see other LL-T17D3 (serv.man10) service manuals if exist.