Read Sharp LL-T17A3 (serv.man10) Service Manual online
LL-T17A3
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-4. Turning the power off
1.
Turn the computer off.
2.
Press the monitor's POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be sure to
unplug it from the AC outlet.
unplug it from the AC outlet.
1-5. Instructions for attaching a VESA compliant arm
An arm or stand based on the VESA standard (commercially available)
can be attached to the monitor.
Procurement of the arm or stand is at the custom-er's discretion.
When choosing the arm to be installed please take note of the following
points.
points.
• The arm should be compatible with the VESA standard, and there
must be a gap of 100mm x 100mm between the screw holes on the
section to be attached.
• The arm must not fall off or break off after being attached to the
monitor.
1.
Ensure that both the monitor and computer are switched off.
2.
Unplug the power cord from the AC outlet.
3.
Remove the analog signal and audio cables from the computer.
4.
Fold back the display section.
1) If carrying out adjustments to the monitor, place it upright.
2) While pressing the rear lock disable button, gently fold back the
monitor.
• Do not overly bend the cable or add extension cords as this could
lead to malfunction.
5. Being careful not to damage the monitor, spread out a soft cloth and
lay the monitor on it display-side down.
6. Attach the arm to the monitor with four screws.
Note: The screws used to attach the arm should be M4 screws with a
length of 7 mm ~ 10 mm protruding from the surface to be
attached. Using different screws could lead to malfunction or
may lead to the monitor falling off, internal damaged, personal
injury.
injury.
7. Connect the analog signal and audio cables and power cord.
Turn the
computer off
OFF
Press power button
Lock disable button
Screw used to attach arm
Arm
Arm
Part of monitor to which arm is
attached
attached
7 - 10mm
Click on the first or last page to see other LL-T17A3 (serv.man10) service manuals if exist.