Read Sharp LL-T17A3 (serv.man10) Service Manual online
LL-T17A3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
2. PRODUCT DESCRIPTION
■
■
■
■
Standing up and adjusting the monitor
Caution:
• Pressure from hands on the LCD panel could cause damage.
• Be careful not to allow your fingers to be pinched.
• Be careful not to place any objects on the cables.
Doing so may result in disconnection or other problems.
Standing up the monitor
Press down on the stand and lift up the top section of the monitor.
Folding up the monitor
1. Remove the AC adapter and the cable.
2. If carrying out adjustments to the monitor, place it upright.
3. While pressing the rear lock disable button (1), gently fold back the
monitor (2).
Angle adjustment
Adjust to an easy to view angle.
• Do not use the monitor when tilted back beyond approximately 20°.
The monitor may fall over leading to injury or malfunction.
1
MENU button
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
the OSD (On Screen Display) Menu.
2 c
/MODE
button
When the OSD Menu is displayed: This button is
used to select menu options.
used to select menu options.
When the OSD Menu is not displayed: This button
is used to set COLOR MODE.
is used to set COLOR MODE.
3 e d
buttons
When the OSD Menu is displayed: These buttons
are used to increase or decrease the value of a
selected option.
are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed: These but-
tons are used to adjust backlight brightness and
speaker volume.
tons are used to adjust backlight brightness and
speaker volume.
4
Power button
Pressing this button turns the power on. (After
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.
5
Power LED
This LED is lit green when in use and orange
when in power-saving mode.
when in power-saving mode.
6
Speakers
Audio entering via the monitor and the external
device connected to the monitor can be heard.
device connected to the monitor can be heard.
7
Audio input
terminal
terminal
A computer's audio output terminal can be con-
nected here. The audio cable included should be
used.
nected here. The audio cable included should be
used.
8
Power terminal The AC adapter is connected here.
9
Analog RGB
input terminal
input terminal
The analog signal cable is connected here.The
analog signal cable included should be used.
analog signal cable included should be used.
F
Security lock
anchor
anchor
By connecting a security lock (commercially avail-
able) to the security lock anchor, the monitor is
fixed so that it cannot be transported.
able) to the security lock anchor, the monitor is
fixed so that it cannot be transported.
The security slot works in conjunction with Kens-
ington Micro Saver Security Systems.
ington Micro Saver Security Systems.
G
Ventilation
openings
openings
Note: Never block the ventilation openings as this
may lead to overheating inside the monitor and
result in malfunction.
may lead to overheating inside the monitor and
result in malfunction.
H
Lock disable
button
button
This button is used when folding back the display
section.
section.
6
12 7
8
9
10
11
1
2
3
4
5
(2)
(1)
approx.20
approx.5
approx.45
approx.45
Prohibited range
approx.20
approx.5
Click on the first or last page to see other LL-T17A3 (serv.man10) service manuals if exist.