LL-T17A3 (serv.man10). Complete - Sharp Monitor Service Manual (repair manual)

ll-t17a3 (serv.man10) service manual
Model
LL-T17A3 (serv.man10)
Pages
18
Size
1.49 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor / Complete
File
ll-t17a3-sm10.pdf
Date

Read Sharp LL-T17A3 (serv.man10) Service Manual online

CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LLT17A3SME
LCD MONITOR
 MODEL
LL-T17A3
      
CHAPTER 1. OUTLINE OF THE PRODUCT, 
NOMENCLATURE AND FUNCTION . . . . . . . . . . . . . . . . . .1 - 1
CHAPTER 2. CONNECTION, ADJUSTMENT, 
OPERATION, AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . .2 - 1
CHAPTER 3. DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . .3 - 1
CHAPTER 4. BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 1
CHAPTER 5. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 1
CHAPTER 6. CIRCUIT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 1
CHAPTER 7. PWB LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 1
Model Name
Product Name
Color
For USA
For Other
LL-T17A3H
LL-T17A3U
LL-T17A3E
Gray
LL-T17A3B
LL-T17A3Y
LL-T17A3P
Black
LL-T17A3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■ 
■ 
■ 
■ 
Product specifications
• LCD display
43 cm measured diagonally
TFT LCD module
• Resolution (max.)
SXGA 1280 x 1024 pixels
• Displayable colors (max.)
Approx.16.19 million colors (6bit + FRC)
• Brightness (max.)
250cd/m
2
•  Dot pitch
0.264(H) x 0.264(V) mm
•  Contrast ratio
500 : 1
•  Angle of visibility
Left-right 160°; Up-down 135°
•  Screen display size
Horizontal 337.9 mm x Vertical 270.3 mm
• Video signal
Analog RGB (0.7Vp-p) [75
]
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL
level: +/-)
• Expansion compensation
Digital screening (Enlargement VGA/SVGA/XGA etc. to full screen size.)
•  Plug & Play
VESA DDC1/DDC2B compatible
• Power management
VESA: based on DPMS
• Speaker output
1W + 1W
• Input signal terminal
Mini D-sub 15 pin (3 row)
•  Audio input terminal
Mini stereo jack
• Screen tilt
Upward approx. 0 - 20°; downward approx. 0 - 5°
• Screen swivel
Approx.90° from left through right (Turn table type)
• Power supply
AC100 - 240V, 50/60Hz 
(Use special AC adapter, type NL-A64J of Sharp Corporation.)
•  Temperature of operating environment
5 - 35°C
• Power consumption
Maximum 44W (Standby state: 3W)
(Use special AC adapter.)
• Dimensions
398(W) x 188(D) x 376(H) mm
• Weight
Approx. 6.5kg (Excluding AC adapter and analog signal cable.)
■ 
■ 
■ 
■ 
Dimensions (Units: mm)
Special AC adapter:
Analog signal cable: Approx. 1.8m
Audio cable : Approx. 1.8m
■ 
■ 
■ 
■ 
Signal timings
Display mode
Hsync
Vsync
Dot 
frequency
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
35.1kHz
56Hz
36.0MHz
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75MHz
1152 x 864
67.5kHz
75Hz
108.0MHz
1280 x 960
60.0kHz
60Hz
108.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
Power 
Macintosh 
series
640 x 480
35.0kHz
66.7Hz
30.2MHz
832 x 624
49.7kHz
74.6Hz
57.3MHz
1024 x 768
60.2kHz
75Hz
80.0MHz
1152 x 870
68.7kHz
75Hz
100.0MHz
1280 x 1024
64.0kHz
60Hz
108.0MHz
80.0kHz
75Hz
135.0MHz
Sun 
Ultra series
1024 x 768
48.3kHz
60Hz
64.13MHz
53.6kHz
66Hz
70.4MHz
56.6kHz
70Hz
74.25MHz
1152 x 900
61.8kHz
66Hz
94.88MHz
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
398
344
376
61.5
239
188
Approx. 1.5 m
Approx. H 147 mm x D 59 mm x H 32 mm
LL-T17A3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
•  Recommended resolution is 1280 x 1024.
•  All are compliant only with non-interlaced.
•  Frequencies for Power Macintosh and Sun Ultra series are reference
values. To connect, another adapter (commercially available) may be
required.
•  If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
•   If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
■ 
■ 
■ 
■ 
The analog RGB input connector pin
■ 
■ 
■ 
■ 
Tecnical specifications
*
Specifications and a part of the appearance are subject to change without notice.
■ 
■ 
■ 
■ 
Power management
The monitor is based on VESA DPMS (Display Power Management
Signaling).
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard.
■ 
■ 
■ 
■ 
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play mon-
itor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC1 and DDC2B.
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
(Mini D-sub connector with 15 pins)
5
1
2
3
4
10
6
7
8
9
15
11
12
13
14
Item
MIN
TYP
MAX
Unit
Power supply voltage
AC
90
100
110
V
DC
11.4
12.0
12.6
V
Working temperature range
0
40
°C
Storing temperature range
-20
60
°C
Humidity range
10
90
%RH
Visual angle range
Vertical (CR 
u
 5)
135
Temperature
Horizontal (CR 
u
 5)
160
Temperature
Contrast ratio (CR)
(
θ
 = 0°)
350
500
Response speed
Leading (
τ
r)
20
ms
Trailing (
τ
d)
Screen white chromaticity
(X)
0.275
0.305
0.335
(Y)
0.308
0.338
0.368
White surface luminance
(Y
L
)
250
cd/m
2
Module model number
Hundai HT17E11-300
DPMS mode
Screen
Power 
consumption
H-sync
V-sync
ON
Display on
44W
Yes
Yes
STANDBY
Display off
3W
No
Yes
SUSPEND
Yes
No
OFF
No
No
LL-T17A3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
2. PRODUCT DESCRIPTION
■ 
■ 
■ 
■ 
Standing up and adjusting the monitor
Caution:
•  Pressure from hands on the LCD panel could cause damage.
•  Be careful not to allow your fingers to be pinched.
•  Be careful not to place any objects on the cables.
Doing so may result in disconnection or other problems.
Standing up the monitor
Press down on the stand and lift up the top section of the monitor.
Folding up the monitor
1. Remove the AC adapter and the cable.
2. If carrying out adjustments to the monitor, place it upright.
3. While pressing the rear lock disable button (1), gently fold back the
monitor (2).
Angle adjustment
Adjust to an easy to view angle.
• Do not use the monitor when tilted back beyond approximately 20°.
The monitor may fall over leading to injury or malfunction.
1
MENU button
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
2 c
/MODE 
button
When the OSD Menu is displayed: This button is
used to select menu options.
When the OSD Menu is not displayed: This button
is used to set COLOR MODE.
3 e d 
buttons
When the OSD Menu is displayed: These buttons
are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed: These but-
tons are used to adjust backlight brightness and
speaker volume.
4
Power button
Pressing this button turns the power on. (After
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.
5
Power LED
This LED is lit green when in use and orange
when in power-saving mode.
6
Speakers
Audio entering via the monitor and the external
device connected to the monitor can be heard.
7
Audio input 
terminal
A computer's audio output terminal can be con-
nected here. The audio cable included should be
used.
8
Power terminal The AC adapter is connected here.
9
Analog RGB 
input terminal
The analog signal cable is connected here.The
analog signal cable included should be used.
F
Security lock 
anchor
By connecting a security lock (commercially avail-
able) to the security lock anchor, the monitor is
fixed so that it cannot be transported.
The security slot works in conjunction with Kens-
ington Micro Saver Security Systems.
G
Ventilation 
openings
Note: Never block the ventilation openings as this
may lead to overheating inside the monitor and
result in malfunction.
H
Lock disable 
button
This button is used when folding back the display
section.
6
12 7
8
9
10
11
1
2
3
4
5
(2)
(1)
approx.20
approx.5
approx.45
approx.45
Prohibited range
approx.20
approx.5
Page of 18
Display

Download Sharp LL-T17A3 (serv.man10) Service Manual (Repair Manual)

Here you can read online and download Sharp LL-T17A3 (serv.man10) Service Manual in PDF. LL-T17A3 (serv.man10) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LL-T17A3 (serv.man10) Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.