Read Sharp LL-T1512W (serv.man7) Service Manual online
LL-T1512W
2 – 5
3. SET-UP INFORMATION, ICC PROFILE
INSTALLING SET-UP INFORMATION AND THE ICC
PROFILE (WINDOWS)
PROFILE (WINDOWS)
Depending on the computer or OS, it may be necessary to use the
computer to operate the installation of monitor set-up information etc.
If so, follow the steps below to install the monitor set-up information.
(Depending on the type of computer or OS, command names and
(Depending on the type of computer or OS, command names and
methods may differ. Please follow the computer’s own operation man-
ual while reading this.)
About the ICC profile
An ICC (International Color Consortium) profile is a file that describes
the color characteristics of the LCD monitor. By using an application
the color characteristics of the LCD monitor. By using an application
that works together with an ICC profile, a high color resolution can be
realized.
• Windows98, WindowsMe and Windows2000 all use the ICC profile.
• When installing Windows98, WindowsMe and Windows2000 set-up
information (described below), the ICC profile is also installed. If you
would like to install the ICC program only, please refer to Installing
the ICC profile.
• When using the ICC profile, please set the [WHITE BALANCE] to
[STD] and the [COLOR MODE] to [OFF].
INFORMATION ABOUT THE COLORSYNC PROFILE
(MACOS)
(MACOS)
About the ColorSync profile
ColorSync is the Apple Corporation’s color management system and
is a function that enables color resolution to be realized when used
is a function that enables color resolution to be realized when used
with a compatible application. A ColorSync profile describes the color
characteristics of the LCD monitor.
Notes: • This monitor’s ColorSync profile works with MacOS8.5 or
above.
• When using the ColorSync profile, please set the [WHITE
BALANCE] to [STD] and the [COLOR MODE] to [OFF].
About installing procedure of, profile please see operation manual.
4. ADJUSTMENT
2-1. BEFORE ADJUSTING THE SCREEN DISPLAY
For analog signal
1. First perform an automatic adjustment.
2. Perform manual adjustment where necessary.
For digital signal
The monitor can generally be used without adjustment. If necessary
perform manual adjustment.
Note: All adjustments will be retained even after turning the power off.
■
■
■
■
ADJUSTING THE BACKLIGHT
The backlight brightness can be adjusted while not displayed the On
Screen Display (OSD) Menu.
When OSD Menu is being displayed, press MENU button (several
times may be required) to escape OSD Menu then operate the adjust-
times may be required) to escape OSD Menu then operate the adjust-
ment.
• Manual adjustment is disabled when Automatic Adjustment (AUTO)
is selected. To enable manual adjustment, set it to other than AUTO
(such as LOW, MID or HIGH).
(such as LOW, MID or HIGH).
1. Without the OSD Menu being displayed, push the
e
or the
d
but-
ton.
2. Pressing the
e
button makes brightness darker, the
d
button
makes it lighter.
The BRIGHT bar automatically disappears approximately 5 seconds
after the last command.
One touch Manual adjustment
1. Without the OSD Menu being displayed, push the BRIGHT button.
2. Select the desired one from LOW, MID and HIGH.
LOW
: Approximately 30% of maximum brightness
MID
: Approximately 60% of maximum brightness
HIGH
: Maximum brightness
On Screen display for adjustment disappears several seconds after
the last operation.
Automatic adjustment
This monitor can perform backlight brightness control automatically
depending on an ambient brightness sensed by BRIGHT SENSOR.
BRIGHT SENSOR
Click on the first or last page to see other LL-T1512W (serv.man7) service manuals if exist.