Read Sharp LL-T1512W (serv.man7) Service Manual online
LL-T1512W
2 – 3
CONNECTING THE MONITOR TO A COMPUTER (PC ETC.)
Analog RGB connection
Connect this device’s analog signal cable to the computer (PC etc.)
Before connecting the cable, ensure that both the monitor and com-
puter are switched off.
puter are switched off.
Be careful not to overly bend the cable or add stress onto the cable as
this could lead to malfunction.
this could lead to malfunction.
When setting up this monitor for the first time or after changing the
configuration of the system in use, perform an Automatic Screen
Adjustment (page 21). (It is not required to perform this process when
Adjustment (page 21). (It is not required to perform this process when
the monitor is used in digital signal input mode)
If the monitor is connected to a Note PC and set to display simulta-
neously on the PC’s screen, the MS-DOS screen may not be dis-
played. If this occurs, you are suggested to set the display on the Note
PC only.
PC only.
Digital RGB connection
Connecting the monitor to a computer via a Digital signal cable (to be
purchased separately)
Before connecting the cable, ensure that both the monitor and com-
puter are switched off.
• This connection is available for connecting to a computer with DVI
compatible output connector (DVI-D24 pin or DVI-I 29 pin) and XGA
output capability. (Depending on the type of computer to be con-
output capability. (Depending on the type of computer to be con-
nected, the display may not work correctly)
• Be careful not to overly bend the cable or add stress onto the cable
as this could lead to malfunction.
TURNING THE POWER ON
1. Press the monitor’s POWER button.
2. Turn on the computer.
The power LED will be lit green, and the screen will display an
image.
image.
SELECTING THE TYPE OF INPUT CONNECTOR
Pressing INPUT button to toggle input connector.
TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor’s POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be
sure to unplug it from the AC outlet.
Analog RGB output connector
(Mini D-Sub 15 pin, 3 row)
Paying attention to connector direction, firmly insert
the analog signal cable to here, and then tighten the
screws at both sides.
(Mini D-Sub 15 pin, 3 row)
Paying attention to connector direction, firmly insert
the analog signal cable to here, and then tighten the
screws at both sides.
Analog signal cable
Analog signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
After connecting the adapter, tighten the
screws on each side to fix into place.
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conversion
adapter (to be purchased separately) to the analog
signal cable.
Power Macintosh, attach a Macintosh conversion
adapter (to be purchased separately) to the analog
signal cable.
Macintosh
conversion adapter
conversion adapter
Digital RGB output connector
(DVI-D 24 pin or DVI-I 29 pin)
Paying attention to connector direction, firmly insert
the digital signal cable to here, then tighten the
screws each both sides.
(DVI-D 24 pin or DVI-I 29 pin)
Paying attention to connector direction, firmly insert
the digital signal cable to here, then tighten the
screws each both sides.
Digital signal cable(to be parchased separalely)
Turn monitor on
Turn on device to
which monitor is
connected
which monitor is
connected
Press power button
Analog RGB signal
Digital RGB signal
Turn off device to
which monitor is
connected
which monitor is
connected
Turn monitor off
Press power button
Click on the first or last page to see other LL-T1512W (serv.man7) service manuals if exist.