Read Sharp LL-171ME (serv.man3) Service Manual online
LL-171ME
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 8
(7) AV2 MODE PERMIT
[ENABLED] (default): user can switch to "AV2" input.
[DISABLED]
: user cannot switch to "AV2" input.
"AV2" button on R/C should be unavailable.
Note:
a.
These settings are effective only for normal input switch.
User can select all sources for PIP and PC sound even if user set
them to "DISABLED".
User can select all sources for PIP and PC sound even if user set
them to "DISABLED".
e.g.
1) TV is disabled but user selects TV source for PIP or PC sound.
That means CH up/down,and direct channel should be avail-
able on PC+PIP(TV) or PC+PC sound(TV).
able on PC+PIP(TV) or PC+PC sound(TV).
2) TV is disabled and user selects AV1 source for PIP or PC sound.
That means CH up/down,and direct channel should be
unavailable on PC+PIP(AV1) or PC+PC sound(AV1).
b.
If user set all of them to "DISABLED", all input sources can be
selected.
selected.
c.
If user select other than "NORMAL" on "START CODE",
d.
Switching input source keys are available for only the enabled
sources.
sources.
e.g.
1) When only PC and AV1 are enabled,
[INPUT]
.
[PC]
3
[AV1]
3
[PC]
[PC] and [AV1] are available but [TV], [CH up], [CH down]
and [AV2] are unavailable except a.1).
2) When one channel is enabled on "TV MODE PERMIT",
[CH up], [CH down], [Flashback] and direct channel should
beunavailable on TV mode.
beunavailable on TV mode.
e.
Channel OSD when one channel is enabled.
e.g. When [CH10] is selected as "TV MODE PERMIT", user
presses [1],[5] and it should be cancelled.
However we don’t mind if [15] OSD would be displayed.
However we don’t mind if [15] OSD would be displayed.
(8) MAXIMUM VOLUME LIMITATION
• The maximum volume of the speaker and head phone is restricted in
the range of 0- 100.
• The volume can not be increased beyond the established value.
• The preset is "100".
• When it is set up in less than 99, volume OSD becomes only a num-
ber, and a volume bar isn't indicated. Please refer below VOLUME
OSD for MAXIMUM VOLUME LIMITATION.
OSD for MAXIMUM VOLUME LIMITATION.
• This setting is common in the PC mode and the TV/AV mode.
• The initial value of the volume becomes 20 when maximum volume is
restricted to 20 when the initial value of the volume is 30.
(9) VOLUME FIXATION
• The user chooses whether the volume of the speaker and the head
phone is fixed or not.
• The preset is "DISABLED".
[How to set up]
1
Before going into the CUSTOM MODE MENU, it is set up in the vol-
ume which it wants to set up in the normal mode with a volume but-
ume which it wants to set up in the normal mode with a volume but-
ton. Volume at this time becomes volume to fix volume.
2
It goes into the CUSTOM MODE MENU after the monitor is turned off.
3
VOLUME FIXATION is changed from DISABLED to ENABLED.
• The setting of DISABLED or ENABLED is common in the PC
mode and the TV/AV mode.( Fixed volume is independent.)
• When a setup is ENABLED, Volume can not be changed, and
VOLUME and MUTE OSD are not indicated even if [VOLUME
b
/
c
] [MUTE] button on the remote controller is pushed.
• When a setup is ENABLED, when [VOLUME. BRIGHT
d
/
e
] but-
tons on the control panel is pushed, VOLUME & BRIGHT OSD is
shown, but volume can not be changed.
shown, but volume can not be changed.
• After a setup is changed from ENABLED to DISABLED, the value
of volume is set up in 1, and it can be changed with [VOLUME
b
/
v] button.
• It gives priority to the setup of VOLUME FIXATION when MAXI-
MUM VOLUME LIMITATION and VOLUME FIXATION are set up
at the same time.
at the same time.
(10)REMOTE CONTROLLER
• An user chose whether the remote controller operation is
"ENABLED" or "DISABLED".
• The preset is "ENABLED".
• Even when a setup is "DISABLED", the remote controller opera-
tion is enabled in CUSTOM MODE MENU.
(11)SCREEN OFF MODE
• An user chose whether "OFF" mode is added in BRIGHT MODE
or not.
• The "OFF" mode is black screen is displayed and back light is
turned off.
• The preset is "DISABLED".
• When OSD DISPLAY is DISABLED, SCREEN OFF MODE is
automatically set up to DISABLED and gray out not to change to
ENABLED.
• When a setup is ENABLED, the mode changes at the time of
[BRIGHT MODE] button push as follows.
• The setting of DISABLED or ENABLED is common in the PC
mode and the TV/AV mode.
[In the PC mode]
[In the TV/AV mode]
When it is set up in "OFF" in the BRIGHT MODE, the display is
changed to the black screen, and "OFF" OSD is indicated for 5 minutes.
After OSD disappears, back light is turned off.
After OSD disappears, back light is turned off.
When the following is manipulated in the BRIGHT MODE at the "OFF"
time, only back light is turned on, and OSD corresponding to the top of
the black screen is indicated.
the black screen is indicated.
[INPUT], [CHANNEL
b
/
c
], [VOLUME +/
-
], [CHANNEL BUTTON 0-9],
[SLEEP], [SOUND], [MUTE], [FLASHBACK], [DISPLAY], [PC], [TV],
[AV1], [AV2] buttons are pushed.
[AV1], [AV2] buttons are pushed.
When the following is manipulated in the BRIGHT MODE at the "OFF"
time, it changes to the BRIGHT MODE of "DARK" (PC mode) or " NOR-
MAL" (TV/AV mode).
MAL" (TV/AV mode).
• The monitor is turned on after turned off.
• [VOLUME/BRIGHT
e d
](on the body), [MENU], [
e
], [
d
], [
b
], [
c
],
[BRIGHT], [VIEW MODE], [FREEZE], [PIP], [BRIGHT MODE],
[TEXT], [SUBTITLE] buttons are pushed.
When it is "PC" -----
"PC MODE PERMIT" should be always
"ENABLED" and be grayed out.
"ENABLED" and be grayed out.
When it is "CHxx" ----- User can select only "ALL" or "CHxx"
(same one as "START MODE") and cannot
select the others.
select the others.
When it is "AV1" -----
"AV1 MODE PERMIT" should be always
"ENABLED" and be grayed out.
"ENABLED" and be grayed out.
When it is "AV2" -----
"AV2 MODE PERMIT" should be always
"ENABLED" and be grayed out.
"ENABLED" and be grayed out.
Brightness which user set up
DARK
BRIGHT
OFF (Added)
Brightness which user set up
NORMAL
DARK BRIGHT
OFF
(Added)
Click on the first or last page to see other LL-171ME (serv.man3) service manuals if exist.