LL-171A. Complete - Sharp Monitor Service Manual (repair manual). Page 2

Read Sharp LL-171A Service Manual online

LL-171A-W/B/LL-171G-W/B
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
This manual is common to LL-171A, LL-171G.
Moreover, and "171A" is a model only for analog inputs, "171G" is a digital input, swivel, and the model to which the height adjustment function etc.
was added.
1. SPECIFICATIONS
■ 
PRODUCT SPECIFICATIONS
• Model name
LL-171A-W (White)/LL-171A-B (Black)
LL-171G-W (White)/LL-171G-B (Black)
• LCD display
43 cm measured diagonally TFT LCD module
• Resolution (max.)
SXGA 1280 x 1024 pixels
• Displayable colors (max.)
Approx.16.19 million colors (6 bit + FRC)
• Brightness (max.)
2
5
0cd/m
2
• Dot pitch
0.264 (H) x 0.264 (V) mm
• Contrast ratio
430:1
•  Angle of visibility
Left-right 170°; Up-down 150° (contrast ratio > 5)
•  Screen display size
Horizontal 337.9 mm x Vertical 270.3 mm
• Video signal
[LL-171A] Analog RGB (0.7Vp-p) [75
]
[LL-171G] Analog: Analog RGB (0.7Vp-p) [75
]
Digital : DVI standard based on 1.0
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, 
Composite Sync (TTL level: +/-)
• Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.)
•  Plug & Play
VESA DDC1/DDC2B compatible
• Power management
• Speaker output
1W + 1W
• Input signal terminal
[LL-171A] Mini D-sub15 pin (3 row)
[LL-171G] Analog
: Mini D-sub15 pin (3 row)
Digital/Analog : DVI-I29 pin
•  Audio input terminal
Mini stereo jack
• Headphone terminal
Mini stereo jack
• Height adjustment [LL-171G]
Adjustment range: approx. 70 mm
• Screen tilt
Upward approx.0 - 25°; downward approx.0 - 5°
•  Screen swivel [LL-171G]
Approx. 45° from the center to the left and
approx. 45° from the center to the right.
• Power supply
AC100 - 240V, 50/60Hz
•  Temperature of operating environment
5 - 35°C
• Power consumption
30W (With no audio input)
(35W maximum, 1W when in power-saving mode)
• Dimensions
[LL-171A] Approx. 374 (W) x 205 (D) x 374 (H) mm
[LL-171G] Approx. 374 (W) x 236 (D) x 368 - 438 (H) mm
• Weight
[LL-171A]
Approx. 6.0 kg (approx. 4.2 kg excluding stand) (Excluding cables.)
[LL-171G]
Approx. 5.6 kg (approx. 4.2 kg excluding stand) (Excluding cables.)
■ 
DIMENSIONS (UNITS: MM)
•  Analog signal cable: approx. 1.8m
•  Audio cable: approx. 1.8m
[LL-171G]
•  Digital signal cable: approx. 1.8 m
•  Analog signal cable, NL-C02E (purchased separately): approx. 2.0 m
•  2-input cable, NL-C03J (purchased separately): approx. 0.25 m
Note: As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
[LL-171A] VESA
: based on DPMS
[LL-171G] VESA
: based on DPMS
DVI
: based on DMPM
[171A]
[171G]
374
254
317
374
205
57.5
374
317
368
438
322
57.5
236
Page of 44
Display

Click on the first or last page to see other LL-171A service manuals if exist.