Read Sharp LL-171A Service Manual online
LL-171A-W/B/LL-171G-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 3
■
Turning the power on
1.
Turn on the main power of the monitor.
• When switching the main power switch on and off, always wait for an
interval of at least 5 seconds. Rapid switching may result in malfunction.
2.
Press the monitor's power button.
3.
Turn on the computer.
When a signal is input from the computer, the power LED lights up
green, and the screen is displayed. (After power is turned on, it may
green, and the screen is displayed. (After power is turned on, it may
take a little time until the screen is displayed.)
Note for LL-171G:
•
If the input terminal to which the computer is connected has not been
selected, the screen will not be displayed. If necessary, perform input
terminal switching.
terminal switching.
Notes:
•
When using an analog signal, perform an automatic screen adjust-
ment under the following conditions:
• Using the monitor for the first time.
• After having changed the system settings during use.
•
When using the LL-171G with a digital connection, automatic screen
adjustment is unnecessary.
•
Depending on the type of computer or OS, you may need to install
the monitor set-up information on your system.
the monitor set-up information on your system.
•
When connecting to a notebook, if the notebook computer's screen is
set to display at the same time, the MS-DOS screen may not display
properly. In this case, change the setting to display only the LCD
monitor.
monitor.
■
Changing between input terminals [LL-171G]
Use the INPUT button to switch between signal input terminals.
When using a 2-input cable
Note:
• When there is no input signal, [NO SIGNAL] is displayed.
■
Turning the power off
1. Turn the computer off.
2. Press the monitor's power button.
The power LED will disappear.
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
switch of the monitor, and remove the power plug from the outlet.
Main power switch
Press power button.
Turn on the
computer power
supply.
computer power
supply.
ON
INPUT-1
<ANALOG>
INPUT
INPUT-2
< >
<ANALOG> or <DIGITAL>
Analog RGB input terminal
DVI input terminal
Analog RGB input terminal
INPUT-1
<ANALOG>
INPUT
INPUT
INPUT
DVI-I input terminal
(analog)
DVI-I input terminal
(digital)
INPUT2-A
<ANALOG>
INPUT2-D
<DIGITAL>
Turn the computer
off.
Press power button.
OFF
Click on the first or last page to see other LL-171A service manuals if exist.