Read Sharp R-90GCK (serv.man21) User Guide / Operation Manual online
TINSEA962WRRZ-K32 UK R90GCK
A39887,R90GCK O/M
x1
8
USING THE STOP/CLEAR KEY
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2.
1. Erase a mistake during programming.
2.
Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the STOP/CLEAR key
twice.
Your oven has a 12 hour clock.
• To set the 12 hour clock, press the CLOCK SET
• To set the 12 hour clock, press the CLOCK SET
key once.
Example:
To set the time of day follow the instructions below:
To set the time of day follow the instructions below:
1. Select the clock.
2. Enter the hours by pressing
the TIME keys.
3. Press the CLOCK SET
key once.
4. Enter the minutes by
pressing the TIME keys.
5. To start the clock, press
the CLOCK SET key
once.
once.
NOTES:
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time re-
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time re-
appears.
• To check the time of day during a cooking process, press the CLOCK SET key and the time of day will
remain on the display as long as you keep your finger on the key. This does not affect the cooking
process.
process.
• When cooking is complete, the display will show “END”.
• If the electrical power supply to your microwave oven is interrupted, the display will show “PRESS
• If the electrical power supply to your microwave oven is interrupted, the display will show “PRESS
STOP” after the power is reinstated. If this occurs during cooking, the programme will be erased. The
time of day will also be erased.
time of day will also be erased.
• When you want to reset the time of day, follow the above example again.
x1
x1
x1
SETTING THE CLOCK
UK R90GCK English Cover-P19 04.1.9 8:55 AM Page 8
Click on the first or last page to see other R-90GCK (serv.man21) service manuals if exist.