Read Sharp R-722STM (serv.man2) User Guide / Operation Manual online
GB-11
BEFORE
OPERATION
SETTING
THE
CLOCK
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
Your oven has a 24 hour clock feature.
1. Press the KITCHEN TIMER/CLOCK button twice. The hour fi gure will fl ash and the clock indicator will illuminate.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the KITCHEN TIMER/CLOCK button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59.
5. Press the KITCHEN TIMER/CLOCK button to start the clock. The icon “:” of the digital time will fl ash on the display and the clock indicator
1. Press the KITCHEN TIMER/CLOCK button twice. The hour fi gure will fl ash and the clock indicator will illuminate.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the KITCHEN TIMER/CLOCK button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59.
5. Press the KITCHEN TIMER/CLOCK button to start the clock. The icon “:” of the digital time will fl ash on the display and the clock indicator
will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will
show "0:00".
• To check the time of day during a cooking process, press KITCHEN TIMER/CLOCK button and the LED will display the time of day for 2-3
seconds. This does not aff ect the cooking process.
• In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power is reinstated. If
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power is reinstated. If
this occurs during cooking, the programme will be erased. The time of day will also be erased.
KITCHEN
TIMER
FUNCTION
You can use the kitchen timer function, in instances where microwave cooking is not involved for example to time boiled eggs cooked on
conventional hob or to monitor the standing time for cooked/defrosted food.
conventional hob or to monitor the standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.
To set the timer for 5 minutes.
1. Press KITCHEN TIMER/
CLOCK button once.
2. Rotate ENTRY dial to select
time .
3. Press the START/+30sec/
ENTER key to start the timer.
4. Check the display.
(The display will count down
through the programmed
time.)
through the programmed
time.)
When the timer arrives at 0:00, an audible signal will sound 5 times and the LED will then display the time of day.
You can enter any time up to 95 minutes. To cancel the KITCHEN TIMER whilst counting down, simply press the STOP/CLEAR button.
NOTE: The KITCHEN TIMER function cannot be used whilst cooking.
MICROWAVE POWER LEVELS
Your microwave has 5 power levels. To set the power levels follow the instruction below.
To set the power level
LED Display
Microwave Power
• Press the MICRO. POWER button once, P100 will be displayed
and at the same time the microwave indicator and power level
indicator will illuminate on the display.
indicator will illuminate on the display.
• Press MICRO. POWER or rotate the ENTRY dial to change the
power level until the display indicates the desired level.
• Press the START/ +30sec./ENTER button to confirm the setting,
enter the cooking time and then press the START/ +30sec./ENTER
button again to start the oven.
button again to start the oven.
• To check the power level during cooking, press the MICRO. POWER
button, the current power level will be displayed for 3 seconds. The
oven will continue to count down although the display will show
the power level.
oven will continue to count down although the display will show
the power level.
HIGH = 100 %
MEDIUM HIGH = 80 %
MEDIUM = 50 %
MEDIUM LOW = 30 %
LOW = 10 %
Click on the first or last page to see other R-722STM (serv.man2) service manuals if exist.