Read Sharp R-291KM (serv.man3) User Guide / Operation Manual online
25
TROUBLESHOOTING
If you think the oven is not working properly there
are some simple checks you can carry out yourself
before calling an engineer. This will help prevent
unnecessary service calls if the fault is something
simple.
Follow this simple check below:
Place a cup of water (approx. 150ml) on the
turntable and close the door securely. Programme
the oven to cook for 1 minute using 800W
microwave power.
1. Does the oven lamp come on when it is
are some simple checks you can carry out yourself
before calling an engineer. This will help prevent
unnecessary service calls if the fault is something
simple.
Follow this simple check below:
Place a cup of water (approx. 150ml) on the
turntable and close the door securely. Programme
the oven to cook for 1 minute using 800W
microwave power.
1. Does the oven lamp come on when it is
cooking?
2. Does the turntable rotate?
3. Does the cooling fan work? (Check by placing
3. Does the cooling fan work? (Check by placing
your hand above the air vent openings.)
4. After 1 minute does the audible signal sound?
5. Is the water in the cup hot?
If you answer “NO” to any question first check that
the oven is plugged in properly and the fuse has not
blown. If there is no fault with either, check against
the troubleshooting chart on the following page.
5. Is the water in the cup hot?
If you answer “NO” to any question first check that
the oven is plugged in properly and the fuse has not
blown. If there is no fault with either, check against
the troubleshooting chart on the following page.
NOTES:
WARNING:
Never adjust, repair or modify the oven
yourself. It is hazardous for anyone other
than a SHARP trained engineer to carry
out servicing or repairs.
This is important as it may involve the
removal of covers that provide protection
against microwave energy.
yourself. It is hazardous for anyone other
than a SHARP trained engineer to carry
out servicing or repairs.
This is important as it may involve the
removal of covers that provide protection
against microwave energy.
• The door seal stops microwave leakage during
oven operation, but does not form an airtight
seal. It is normal to see drops of water, light or
feel warm air around the oven door. Food with
a high moisture content will release steam and
cause condensation inside the door which may
drip from the oven.
seal. It is normal to see drops of water, light or
feel warm air around the oven door. Food with
a high moisture content will release steam and
cause condensation inside the door which may
drip from the oven.
• Repairs and Modifications: Do not attempt to
operate the oven if it is not working properly.
• Outer Cabinet & Lamp Access: Never remove
the outer cabinet. This is very dangerous
due to high voltage parts inside which must
never be touched, as this could be fatal.
Your oven is not fitted with a lamp access cover.
If the lamp fails, do not attempt to replace the lamp
yourself, call a SHARP approved service facility.
due to high voltage parts inside which must
never be touched, as this could be fatal.
Your oven is not fitted with a lamp access cover.
If the lamp fails, do not attempt to replace the lamp
yourself, call a SHARP approved service facility.
IMPORTANT:
If the display is blank and has gone dark, even if the
power plug is properly connected, the oven may be
in Energy Save Mode. To cancel it, open and then
close the oven door, see page 10.
If the display is blank and has gone dark, even if the
power plug is properly connected, the oven may be
in Energy Save Mode. To cancel it, open and then
close the oven door, see page 10.
R-291(K)M_01_[FC-27].indd 25
R-291(K)M_01_[FC-27].indd 25
1/30/2014 10:48:15 AM
1/30/2014 10:48:15 AM
Click on the first or last page to see other R-291KM (serv.man3) service manuals if exist.