AX-1100(R)M, AX-1100(SL)M (serv.man11). Component Replacement And Adjustment Procedure - Sharp Home Appliance Service Manual (repair manual). Page 8

AX1100(R)M

12 – 8

1. Door latch heads smoothly catch latch hook through latch holes

and that latch head goes through centre of latch hole. 

Deviation of door alignment from horizontal line of cavity face plate
is to be less than 1.0mm.

2. Door is positioned with its face pressed toward cavity face plate.

3. Check for microwave leakage around door with an approved micro-

wave survey meter. (Refer to Microwave Measurement Proce-
dure.)Deviation of door alignment from horizontal line of cavity face
plate is to be less than 1.0mm.

NOTE: The door on a microwave oven is designed to act as an elec-

tronic seal preventing the leakage of microwave energy from
oven cavity during cook cycle. This function does not require
that door be air-tight, moisture (condensation)-tight or light-
tight. Therefore, occasional appearance of moisture, light or
sensing of gentle warm air movement around oven door is not
abnormal and do not of themselves, indicate a leakage of
microwave energy from oven cavity.

           Figure C-9. Door Replacement

1. Turn the door cover to the back side.

2. First, cover the four corners of the door cover opening with four cor-

ners of the door packing.

3. Cover all surroundings of the door cover opening with the ditch of

the door packing surely because the section of the door cover
opening is T letter form. Refer to the expansion photograph of the
door packing and the door cover.

4. Turn the door cover to the face side.

5. Cover surely if there is a part where the door packing doesn't cover

the door cover.

6. It is confirmed for the door packing not to stretch over all surround-

ings, not to remain, and to cling uniformly.

• Do not damage the surface of the door packing.

• Confirm there is neither microwave leakage from the door nor

Pin

PIN

Lower

Oven

Hinge

Upper

Oven Hinge

Lower

Oven

Hinge

Door Cover

Slit Choke

Door Panel

Door Frame

DOOR COVER

DOOR PACKING

DOOR COVER

DOOR PACKING

Ditch of the door packing

Door cover opening which the section is T letterform.