Read Sharp VENTA HANDHELD (serv.man8) Service Manual online
3. Installation
Installation Basics
Before attempting to install as below a wireless access point should be
connected on the network to be used as shown in the configuration diagram.
connected on the network to be used as shown in the configuration diagram.
Many different types of access point are available in the market place and as
long as the one selected is Wi-Fi compatible and complies with IEEE 802.11b
long as the one selected is Wi-Fi compatible and complies with IEEE 802.11b
the system should work. DO NOT select an AP that complies ONLY with
802.11G or “Extreme G”
The access points that have been tested are :-
D-Link DWL-2000AP+
D-Link DWL-700AP
Appendix A shows the basic set-up required to make the AP connect. The
method of encryption should be determined by the installing company.
method of encryption should be determined by the installing company.
However it is recommended that 64bit encryption is used as a minimum this
is set on the AP and is compatible with the UPX200 40bit encryption which
requires a 10 digit code to be input at both the AP (which should be done
requires a 10 digit code to be input at both the AP (which should be done
first) and the UPX200. This will ensure only devices with this code can
communicate with each other.
communicate with each other.
Venta PRO V2 Installation
This system will only function using the Venta PRO V2 software. This must be
installed in accordance with the Venta PRO V2 installation procedure.
When Venta PRO V2 is installed the HHT system will work in a “unregistered”
condition, however if the system is registered it MUST be registered with the
Handheld option set. If the flag is not set the HHT system will not work.
Handheld option set. If the flag is not set the HHT system will not work.
Venta
+
will also need to be registered
Once Venta PRO POS is set-up NO other configuration is required, devices
attached will connect automatically.
Sharp Electronics (UK) Ltd – Paul Burton
8 of 40
Venta
+
Operation & Programming Manual January 2005 – Version 1.0
Click on the first or last page to see other VENTA HANDHELD (serv.man8) service manuals if exist.