UP-5900 (serv.man8). UP5900 Service Manual - Sharp EPOS Service Manual (repair manual). Page 12

UP-5900VS

SERVICE PRECAUTION

3 – 3

Procedure 

3

■

■

■

■

1.

Content of change

The core of the cable connecting the power unit and the main PWB

unit is changed. 

■

■

■

■

Fig.1 LCD cable treatment and core addition

Fig.2 LCD cable treatment (Cable and riser fixing)

Fig.4 Earth Spring 1 (30PK)

l

Fig.5 Earth Spring 2 

*

Earth Spring 1 and 2 are the same one.

*

Earth Spring 1 in Fig.4 is packed together with 30PK.

Procedure 

1

Pass the binding band through the core as shown in

the photo.

Procedure 

2

Bind the core as shown in the photo and pull the

band to fix.

Procedure 

3

Fix so that the binding position of the band does not
extend out of the plate.

Binding position of the 
binding band

Inside

The binding position of the band 
must be inside of this position.

Core: RCORF2356BHZZ(SC18E)
Pass all the cables (1pin - 15pin) 
through the core (SC18E) except for 
the power cable. At that time, be 
careful not to apply an external force 
to the power unit capacitor.

This cable is passed under the 
PS unit - Main PWB cable.

Binding band

Binding band

BNF18

Use the binding band for 
wiring as shown in the 
figure.

30PK standard destination model