Read Sharp UP-3515 (serv.man7) User Guide / Operation Manual online
4
Contactless clerk switch
Contactless clerk key
(optional)
Contactless clerk switch is used with contactless clerk keys.
Contactless clerk key
Put the key to the contactless clerk switch.
How to open the side cover
Side cover release lever
(located at the bottom cabinet)
Side cover
1
2
3
While moving the side cover release lever towards you, pull
the side cover and rotate the cover upward as shown in the
illustration at the right.
the side cover and rotate the cover upward as shown in the
illustration at the right.
Terminal Connection /slot inside the side cover
RESET switch
DO NOT move the reset switch unless instructed to do.
Doing so may damage or delete the data.
SD card slot
RS232 port
NOTE
The application software will determine the usage and availability of the external port.
■
Display adjustment
You can adjust the brightness of the display by using the
brightness control (to adjust the brightness, rotate the dial to
the right or left).
The display may be positioned for the best viewing angle.
The allowable tilt angle of the display is within 53 degrees as
shown in the illustration at the right.
brightness control (to adjust the brightness, rotate the dial to
the right or left).
The display may be positioned for the best viewing angle.
The allowable tilt angle of the display is within 53 degrees as
shown in the illustration at the right.
CAUTION:
• Do not pull the display beyond the maximum tilt angle nor apply excessive pressure to the display.
When adjusting the display, hold the body of the terminal when pulling the display of the terminal to
minimize terminal movement.
minimize terminal movement.
• The LCD module built in this POS terminal is manufactured with highly precise technology. However
bright pixels or blank pixels may appear. Occasionally, an irregular colour or uneven brightness may
occur depending on the display settings or the view angle. Please note that this type of phenomena is
common for LCDs and may not be a malfunction of the system.
occur depending on the display settings or the view angle. Please note that this type of phenomena is
common for LCDs and may not be a malfunction of the system.
• The backlight in the display is a consumable part.
When the LCD display can no longer be adjusted and becomes darker, you should replace the LCD
module. Consult your authorized SHARP dealer for further details.
module. Consult your authorized SHARP dealer for further details.
53˚
Click on the first or last page to see other UP-3515 (serv.man7) service manuals if exist.