UP-3515 (serv.man7). UP3515 instruction Manual - Sharp EPOS User Guide / Operation Manual. Page 3

Read Sharp UP-3515 (serv.man7) User Guide / Operation Manual online

1
INTRODUCTION
Thank you very much for your purchase of the SHARP POS Terminal Model UP-3515.
Please read this manual carefully before operating your POS Terminal. Please keep this manual for future 
reference.
IMPORTANT
• Install this terminal in a location that is not subjected to direct radiation, unusual temperature
changes, and high humidity or exposure to water or other liquids.
Installation in such locations could cause damage to the cabinet and the electronic components.
• Do not drop this terminal nor subject it to any strong shock.
This may cause damage to the terminal.
• Do not apply excessive pressure to the display. Do not use a sharp-pointed object on the display.
This may cause damage to the LCD display.
• When cleaning this terminal, use a dry, soft cloth. Never use solvents, such as benzene or thinner.
The use of such chemicals will lead to discoloration or deterioration of the cabinet.
• The terminal plugs into any standard wall outlet (official (nominal) voltage).
Other electrical devices on the same electrical circuit could cause the terminal to malfunction.
• If the terminal malfunctions, call your local authorized dealer for service. Do not try to repair the
terminal yourself.
• Be sure to use the supplied AC adapter and AC power cord. Otherwise, an electric shock or fire
may be caused.
• For a complete electrical disconnection, remove the AC power cord from the wall outlet.
PRECAUTION
This POS terminal has a built-in memory protection circuit which is operated by a rechargeable battery pack.
Please note that all batteries will, in time, dissipate their charge even if not used. Therefore to insure an 
adequate initial charge in the protection circuit and to prevent any possible loss of memory upon installation, 
it is recommended that each unit be allowed to be recharged for a period of 24 to 48 hours prior to use by 
the customer.
After installation, the battery pack is charged when the machine is plugged in. This recharging precaution 
can prevent unnecessary initial service calls.
This product utilizes fluorescent tubes containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or 
recycling information, please contact your local authorities.
English
Page of 84
Display

Click on the first or last page to see other UP-3515 (serv.man7) service manuals if exist.