Read Sharp UP-3500 (serv.man38) Driver / Update online
UP-3500/3515
Manual – V1.6x
Changes / Improvements / Corrections since V1.63
Doc: up35xx_pm_e_1v67
Page 21 / 41
Parts & Technical Services
>>> Changes / Improvements / Corrections since V1.63 <<<
C 3
Saved Reports in Inline-System
C 3.1
In case of an Inline System with a Backup-Master, while the Backup-Master has taken over the role
of the Master (due to Master down), the Backup-Master still behaves like the Satellite as far as the
Saved Reports are concerned.
Only the Electronic Journal as well as PGM Backup and ALL RAM Backup, according to their setting,
will be saved on SD Card.
This specification is valid from version V1.63 onwards.
of the Master (due to Master down), the Backup-Master still behaves like the Satellite as far as the
Saved Reports are concerned.
Only the Electronic Journal as well as PGM Backup and ALL RAM Backup, according to their setting,
will be saved on SD Card.
This specification is valid from version V1.63 onwards.
Stacked Reports
C 3.2
A Stacked Report called at the Satellite shows a “strange” behaviour like no cut between the
individual reports or even not printed correctly at all.
This is corrected with V1.63.
individual reports or even not printed correctly at all.
This is corrected with V1.63.
Individual Clerk-Z Report is missing in the Electronic Journal
C 3.3
This phenomenon only occurs by using the Recall Closed Transaction feature and only after the
following entry:
following entry:
•
Make a GLU registration and finalize it.
•
Carry out the individual Clerk-Z Report.
•
Return to registration mode, recall the previous finalized GLU registration and finalize it
again.
again.
Now, if the General-Z Report has been taken, the individual Clerk-Z Report is missing in the
electronic Journal, but not on the paper journal.
Since V1.63 the individual Clerk-Z Report will also be written into the Electronic Journal even after
above mentioned operation.
electronic Journal, but not on the paper journal.
Since V1.63 the individual Clerk-Z Report will also be written into the Electronic Journal even after
above mentioned operation.
Missing discount in PLU report by granting SBTL% or SBTL(-) discount
C 3.4
Although a SBTL% or SBTL(-) discount has been given, it was not reported in the PLU report.
Since V1.63 the given discount will be reported in the PLU report as well.
Since V1.63 the given discount will be reported in the PLU report as well.
No saving of EJ if General-Z report is in Stacked Report
C 3.5
If the General-Z report has been put to a Stacked Report and the SRV parameter #992B is set to
“Save&Clear EJ on SD Card after Gen. Z” (+1) the EJ was not written and cleared to the SD card
after the Stacked Report was carried out.
This has been corrected with V1.63.
“Save&Clear EJ on SD Card after Gen. Z” (+1) the EJ was not written and cleared to the SD card
after the Stacked Report was carried out.
This has been corrected with V1.63.
Click on the first or last page to see other UP-3500 (serv.man38) service manuals if exist.