Read Sharp UP-3500 (serv.man36) FAQ online
7. PLU key in place of existing Function Key
Q. Within SRV mode I have assigned a Function key to the keyboard how do I
change this location to be a PLU
change this location to be a PLU
A. Within SRV - select 999 inhibit and touch the function key on the screen. Then
within PGM2 - Direct Key assign the PLU key to the required location
8. Key Sizes
Q. What different key sizes can I use
A. Single, Horizontal Triple, 2x2,Vertical Double, Horizontal Double
9. TMT88 Receipt Printer Baud Rate
Q. What is the baud rate of the Receipt, Report Printer
A. 19200 when using tm88 all dip switches should be off
10. TM220 KP Printer Baud Rate
Q. I am using a TM-220 as the KP what should I set the printer’s baud rate to.
Q. I am using a TM-220 as the KP what should I set the printer’s baud rate to.
A. 9600 all dip switches off
11. TMT88 KP Printer Baud Rate
Q. I am using a TM-T88 as the KP what should I set the printer’s baud rate to.
Q. I am using a TM-T88 as the KP what should I set the printer’s baud rate to.
A. 19200 all dip switches should be off
12. Bit Maps
Q. Is it possible to assign a BMP or JPG to a button.
A. No
13. Cumulated Print
Single line item print on the receipt. (Recapitulation)
Q. Can I set the receipt printer to print the same items on individual lines.
A. Yes. Set the “Editing Print” to “No” option in PGM2 – Setting – Optional – Print
Select1.
Select1.
If you enter the items as follows, they will appear on the receipt on individual
lines. (Also applies if transaction has been overlapped.
Stella
lines. (Also applies if transaction has been overlapped.
Stella
Stella
Stella
Stella
14. Dotted lines under item on printout
Q. Can I remove the dotted line under the product on the receipt.
A. Yes set Service line 929A=4
Click on the first or last page to see other UP-3500 (serv.man36) service manuals if exist.