Read Sharp UP-3301 (serv.man6) Service Manual online
38
NOTE
•
The terminal numbers and machine numbers of the master and satellites must be entered into
the master list for IRC communications.
•
The terminal numbers and machine numbers of up to 16 machines (one master and 15
satellites) can be entered into the master list.
•
The terminal number should be within the range from 1 to 254 and the machine number from 1
to 999999.
•
No satellite can perform inline communications unless its terminal and machine numbers are
present in the master list.
•
If a machine number which already exists in the master list is entered, a entry error will occur
even when the corresponding terminal number does not exist in the list.
•
If a set of terminal and machine numbers that exists in the master list is entered, no error will
occur (the list will remain unchanged.)
(2) Deleting a machine from the master list (subwindow program)
To delete a terminal number from the master list, proceed as follows:
1. Select “PGM2 MODE” from the mode selection window and touch the
ENTER
key to enter
the PGM2 mode.
2. Select “SETTING” and touch the
ENTER
key. The SETTING window will open.
3. Select “INLINE CONFIG” and touch the
ENTER
key. The INLINE SETTING window will open.
4. Touch the
CASH/TL
key. The subwindow for the master list will open.
5. Enter the terminal number to be deleted and touch the
DELETE
key.
6. The machine will ask you as follows: “ARE YOU SURE?” If you are sure to delete it,
select “YES.” If not, select “NO.”
7. Touch the
CASH/TL
key to complete the master list.
NOTE
•
You can delete any of the terminal numbers that are in the master list.
•
Deleting the master from the master list will inhibit all requests of the satellites from being
serviced.
Click on the first or last page to see other UP-3301 (serv.man6) service manuals if exist.