Read Sharp UP-3301 (serv.man6) Service Manual online
35
IRC Programming
First, turn on the machines in the IRC system and put them in the PGM2 mode. The
programming procedures for both the master and satellites will be explained below.
1. Setting the machine numbers — master and satellite
It is necessary to assign machine numbers to the master and satellites before programming.
1.
Select “PGM2 MODE” from the mode selection
window and touch the
ENTER
key to enter the PGM2
mode.
2.
Select “SETTING” and touch the
ENTER
key.
3.
Select “TERMINAL” and touch the
ENTER
key.
4.
Select “MACHINE#” from the TERMINAL window,
enter a machine number and touch the
ENTER
key.
Machine number: up to 6 digits (0–999999)
5.
Repeat steps 1 to 4 for all machines in the IRC
system.
NOTE
In an IRC network, each machine number must be unique.
Do not use the same number for more than one machine.
3
Click on the first or last page to see other UP-3301 (serv.man6) service manuals if exist.