Read Sharp UP-3301 (serv.man6) Service Manual online
12
NOTE
Check the contents of the programming of all the satellites in the IRC system that have received
the preset data.
8. Downloading the contents of the programming to
satellites — master
When you have completed the programming at the master, you can distribute the preset data
from the master to all satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, use this downloading method. When the preset data in
the master is downloaded to each satellite, then the existing preset data in the satellite is
cleared.
1.
Enter the PGM2 mode.
2.
Select “INITIAL D/L” and touch the
ENTER
key.
The INITIAL D/L window will open.
3.
In order to distribute all preset data files in the master
to satellites, select “ALL PGM” and touch the
ENTER
key.
In order to distribute an individual preset data file,
select the corresponding item and touch the
ENTER
key.
If needed, enter the code range.
4.
If you wish to download the preset data to all
satellites, select “ALL” and touch the
ENTER
key. If you
wish to download the data to certain satellite(s), select
“MACHINE SELECT” and touch the
ENTER
key. In this
case, the “MACHINE SELECT” window will open.
Move the cursor to the corresponding machine
numbers and select “YES.”
Click on the first or last page to see other UP-3301 (serv.man6) service manuals if exist.