Read Sharp UP-3300 (serv.man6) Handy Guide online
FAQs
Q. What is the maximum distance of cable that the serial printers
can operate from when connected to the UP3300?
can operate from when connected to the UP3300?
A. We have carried out some workshop tests, the maximum length
we have tried is 70 metres as this was deemed to be sufficient.
This distance was not a problem under our workshop conditions. It
is important to understand that the environment conditions will
affect the overall distance achievable. The cable to be used has to
be CAT 5 cable.
we have tried is 70 metres as this was deemed to be sufficient.
This distance was not a problem under our workshop conditions. It
is important to understand that the environment conditions will
affect the overall distance achievable. The cable to be used has to
be CAT 5 cable.
Q. Can the UP3300 produce as many as are required fully
itemised bills without zero priced items being printed and with the
amount to pay being printed for any open table.
itemised bills without zero priced items being printed and with the
amount to pay being printed for any open table.
A. Yes, using the GC Receipt feature. There are a couple of lines
that have to be changed from MRS setting, these allow for the
above feature, they are job code 921-C and job code 928-D.
If these lines are set for Bill printing method as continuous and for
Printing of NBAL on slip you will achieve the desired affect.
that have to be changed from MRS setting, these allow for the
above feature, they are job code 921-C and job code 928-D.
If these lines are set for Bill printing method as continuous and for
Printing of NBAL on slip you will achieve the desired affect.
Q. Is it possible to have logo graphic printed on the Sharp UP-
80BP printer.
80BP printer.
A. Yes, the graphic logo which is to be down loaded to the printer
has to be a BMP type file also the size of this graphic is 174(h) x
480(w). Once the graphic has been created on your computer you
will need to use the Free of charge utility (com33v) to down load
the graphic to the Printer.
has to be a BMP type file also the size of this graphic is 174(h) x
480(w). Once the graphic has been created on your computer you
will need to use the Free of charge utility (com33v) to down load
the graphic to the Printer.
Click on the first or last page to see other UP-3300 (serv.man6) service manuals if exist.