UP-3300 (serv.man4). Service settings - Sharp EPOS Handy Guide. Page 4

4

The printer name refers to the printer you are presently setting up
if you press the list key six printer types will appear ready for your
selection. If the printer type is not on this list select one which is
most similar, for example if you are using the TM200 printer select
the TM300.

The paper sheet is for single station or twin station printer.

The head logo print can be set to Pre Print or each issue. The
purpose of the each issue selection is to ensure the logo is always
printed on the receipt even if the printer doubles as receipt and
KP.

The receipt length refers to the amount of line feeds that will occur
on the end of a Bill.

The print type is used to select the receipt print format.
On previous models this was a global setting for all printing. You
now have the option to specify the format for receipt or KP.

Although the printer type we chose as an example was the receipt
printer all the other printer types have very similar settings.

Therefore the only other device we need to explain in the device
config area is the On line settings.

There are two jobs to set for PC comms.
The first is to set the channel number for the Online; this is set
under Device config.
The other is to set the Terminal number and Baud rate etc, for the
Computer, this is set in the Online config in program mode.

Remember never assign two different devices to the same
channel number, as this will prevent the device from working.

That concludes the explanation for the device configuration.

The System Pre-set is the next selection from the service menu.