ER-A880. ERA850 880 Training Tape Transcipt (Jan1998) - Sharp EPOS Handy Guide. Page 37

37

earlier that there can be up to 9 keyboards on the 850 or 880 and 99 on
the UP5700.

In the next area you select the number of cash drawers available for this
machine.
Each machine can have up to 2 drawers, and each server can be
assigned a drawer number.
Also the cash declaration report can be taken against each drawer.

The auto table release selection refers to the servers being assigned to
specific tables.
If auto table release is set to yes, this would allow any server access to
any of the open tables on a system.
Therefore server 1 could start the order and a different server could
pick up the table to add further orders.
If however you only wanted the system to allow the server who started
the transaction to continue entries, on that table, then you would set auto
table release to no.
If no is selected there is another procedure to free the table for another
server. This would be by using the table release key which we
mentioned earlier in the function section.

The next choice is which port you want to connect the bar code scanner
to.

After that you select whether you want this particular machine to
produce an itemized receipt or total only receipt.

The void stay down function works in the following way.
If void stay down is set to yes then once the void key has been pressed
any number of the products on screen can be selected and voided.
if the void stay down is set to no, then only one product can be
selected, the void key would need to be pressed again for each product
to be voided.

The Vat receipt refers to the vat analysis being printed on the bottom of
the customers receipt. The vat content or number will not be printed if
no is selected here.