DOS HOSPITALITY (serv.man3). UP5700 Version 4 Programming Manual (Versions 4.2, 4.3, 4.4, 4.5 4.6 4.7) - Sharp EPOS Service Manual (repair manual). Page 88

88

After these settings have been made the POS system will work with Fidelio. Care should be
taken NOT to set MFPORT on any machine that does not have the physical connection to the
Fidelio PC. From the above settings set them as follows :-

MFPORT

This setting is the RS232 port that is used on the Fidelio POS to connect it
via RS232 to the Fidelio PC.

MFTILL

This setting should be made on ALL POS connected on a system to
determine which POS has got the physical connection to the Fidelio PC.

MFID

This field should be set to the Site ID used on site. If left not used the POS
number is sent to Fidelio.

MFTMO

This setting sets the Timeout period on the POS if NO response has been
received from the Fidelio PC.

MFGCON

The Guest Check/Order Number field can be used in two ways. If this field
is set to “0” then the POS Transaction Number is sent to Fidelio in this
field. If “1” is set  then the Table Number is sent to Fidelio.

MFTAX

The Tax fields can also be changed when sent to Fidelio. If “0” is set then
ALL tax fields will be set to 0.00. If a “1” is set then the fields Tax 1-4 will
be filled with POS Tax rates 1-4.

PROMGRATn

This will set which Promotion Numbers are set to Gratuity. This is
necessary to ensure the correct amounts are sent to Fidelio

MFID

Leave REM’d (i.e # MFID=1). The POS number will be sent to Fidelio

MFTMO

Set to 30

MFGCON

Set to Zero

MFTAX

Set to Zero

PROMGRATn

If using a positive discount for gratuity ensure the n is set to the Promotion
number. Failure to do so will result in positive discounts (i.e Service
Charge) appearing at Fidelio in the discount field