DOS HOSPITALITY (serv.man3). UP5700 Version 4 Programming Manual (Versions 4.2, 4.3, 4.4, 4.5 4.6 4.7) - Sharp EPOS Service Manual (repair manual). Page 35

Read Sharp DOS HOSPITALITY (serv.man3) Service Manual online

35
24. Cashback on EFT (4.3 Only)
It is now possible to carry out Cashback transactions on Switch & Delta Cards. This can be
done with Commidea & Retail Logic. Once the settings have been made the POS will ask
“Cashback” Yes or No
Programming
A new setting has been introduced in RINCS.CFG it is necessary to remove the following
line in Commidea settings or Retail Logic settings :-
REM ---VERSION 4.3 ONLY---
REM IF CASHBACK IS REQUIRED REMOVE REM STATEMENT BELOW AND SET n & m.
REM n=0 OR 1 1=ENABLE 0=DISABLE, m= MAXIMUM AMOUNT IN PENCE
REM EFTCASHBACK=n,m
To enable Cashback remove the REM line in front of the setting and set it as
EFTCASHBACK=1,5000
This will set cashback on and a maximum limit of £50.00
As well as the RINCS setting it is also necessary to make a change in FM under Payment
Types. In the EFT Column it is now possible to set Yes, No and Cbk. Cbk enables Cashback
on the particular method of payment.
Please be aware 2 Credit/Debit keys will now be needed on the payment screen, One for
Standard Credit ( No Cashback) and the other for Debit Cards (With Cashback)
N.B It may be necessary to change your EFT Software to enable this feature.
Operation
When a transaction is finalised using the payment method set to “Cbk” after swiping the card
the operator will be prompted for Cashback if yes is selected the display shows the maximum
Cashback value and allows the operator to enter the required value. This has to be confirmed
and the transaction is sent for Authorisation. If the Card type is not set on the EFT Software
to give Cashback an error will occur. If authorisation is given by the bank the transaction
finalises in the same way as normal EFT. The Cashback is printed on both the store and
customer voucher.
Page of 102
Display

Click on the first or last page to see other DOS HOSPITALITY (serv.man3) service manuals if exist.