Read Sharp XE-A212 (serv.man2) Service Manual online
XE-A212
PROGRAM MODE
2 – 12
[JOB#76] GENERAL Z1 RESET REPORT COUNTER
-- XXXX --
MRS = 0000
XXXX : RESET COUNTER (4digits)
[JOB#77] GENERAL Z2 RESET REPORT COUNTER
-- XXXX --
MRS = 0000
XXXX : RESET COUNTER (4digits)
[JOB#86] TRAINING CLERK PROGRAMMING -- XX --
MRS = 0
X : CLERK No. = 0 (INHIBIT), 1 to 20
22) DOMESTIC CURRENCY SYMBOL PROGRAMMING
CHARACTERS): CHARACTER (Max. 4 Characters)
Characters can be entered by using the character layout on keyboard or
using numeric keys on keyboard.
THE KEY ENTRY SEQUENCE FOR ENTERING ONE CHARACTER
BY NUMERIC KEYS IS AS FOLLOWS:
using numeric keys on keyboard.
THE KEY ENTRY SEQUENCE FOR ENTERING ONE CHARACTER
BY NUMERIC KEYS IS AS FOLLOWS:
YYY
3
[00] KEY
YYY : CHARACTER CODE (3 DIGITS)
(or [000] KEY ACCORDING TO PGM PRESET)
(or [000] KEY ACCORDING TO PGM PRESET)
MRS = ___
*
( _: space code)
This symbol is printed with (+) amount of domestic currency.
The programmed characters is printed at left side of amount.
The programmed characters is printed at left side of amount.
Ex) Case of " DM ":
| DEPT.01 DM1.00 |
| DEPT.01 DM1.00 |
2
Programmed symbol
If some space characters are programmed at the left side of symbol
(like "
(like "
*
"), they are not counted as the number of character of the cur-
rency symbol. (In case of " DM", the number of character is 2.)
Ex) Case of " DM": (The currency symbol means "DM")
|AAAADEPARTMENT01 DM10000.00 |
|AAAADEPARTMENT01 DM10000.00 |
2
Programmed symbol
23) TRAINING MODE TEXT PROGRAMMING
CHARACTERS): CHARACTER (Max. 12 characters)
Characters can be entered by using the character layout on keyboard or
using numeric keys on keyboard.
using numeric keys on keyboard.
THE KEY ENTRY SEQUENCE FOR ENTERING ONE CHARACTER
BY NUMERIC KEYS IS AS FOLLOWS:
YYY
3
[00] KEY
YYY : CHARACTER CODE (3 DIGITS)
( or [000] KEY ACCORDING TO PGM PRESET)
MRS =
**
TRAINING
**
24) TEXT CHANGING (TO DEFAULT TEXT)
X: 0 = English text
1 = German text
2 = French text
2 = French text
3 = Spanish text
MRS = 0
When this job is executed, below texts are set as default data.
(a) Function text
(b) Each message text (LOGO,etc..)
(c) Clerk name
(c) Clerk name
25) RESETTING OF ALL COUNTER AND TOTALIZER
All counter, totalizer, EJ data all GTs, and all Z counter are reset.
26) CHANGING MEMORY TYPE
(EJ RECORD AND PLU RECORD)
X : 0 = TYPE1 (EJ:8000 records and PLU 1200 records)
1 = TYPE2 (EJ:9000 records and PLU 210 records)
MRS = 1
When this job is executed, EJ records are deleted and PLU records are
set the default data after deleted all records even if same memory type
is entered.
is entered.
27) MAXIMUM NUMBER OF DEPARTMENTT
XX : Max Number of DEPARTMENT
This job is used for the limitation of below functions.
(1) Programming for the department code over the maximum num-
ber of department.
(2) Registration for the department code over the maximum num-
ber of department.
(3) Registration for the PLU that is associated to department over
the maximum number of department.
(4) Printing for the department data over the maximum number of
department at PGM READING and XZ REPORTS.
MRS = 50
(CHARACTERS)
ST
ST
85
TL
NO CHANGE
(CHARACTERS)
ST
ST
87
TL
NO CHANGE
X
ST
88
TL
0
ST
89
TL
ST
X
90
TL
ST
XX
95
TL
Click on the first or last page to see other XE-A212 (serv.man2) service manuals if exist.