Read Sharp XE-A137 (serv.man3) User Guide / Operation Manual online
78
5
Replacing the Paper Roll
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls other than those specified could cause paper jamming, resulting in register
malfunction.
The use of any other paper rolls other than those specified could cause paper jamming, resulting in register
malfunction.
Paper specification
Paper width: 57.5 ± 0.5 mm
Max. outside diameter: 80 mm
Quality: High quality (0.06 to 0.08 mm thickness)
Max. outside diameter: 80 mm
Quality: High quality (0.06 to 0.08 mm thickness)
• Be sure to set the paper roll prior to using your machine, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful to set the roll correctly.
(How to set the paper roll)
To the printer
Incorrect
To the printer
Correct
■
Removing the paper roll
When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with a new one. If you
plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate
place.
plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate
place.
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.
Print roller arm
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Remove the paper roll from the paper roll cradle.
NOTE
Do not pull the paper through the printer.
■
Installing the paper roll
For information on how to install paper rolls, refer to “Installing a Paper Roll” on page 9.
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.
Click on the first or last page to see other XE-A137 (serv.man3) service manuals if exist.