Read Sharp ER-A450S (serv.man5) Service Manual online
[7] Calendar oscillator test
1) Key operation
2) Functional description
This program is used to test the calendar oscillator function.
Display:
"
✻✻
–
✻✻
" shows the current time.
"–" is blinking. (500ms ON and OFF)
3) Check items
Time elapsed after master reset must be displayed.
4) Test termination
Press any key. The terminates with the test and message printed
[8] SSP test
1)Key operation
2) Functional description
If an SSP is programmed, its contents are automatically chacked and
the result is printed.
the result is printed.
Display:
3) Check items
Check printing of the termination message.
4) Test termination
This check is terminated automatically.
The test terminates with the test and message printed
In this SSP check, set the data for check in the empty area of SSP
entry REG and erase the data for check after completion of check.
Therefore SSP setting before check is not cleard.
If therefore there is no SSP entry REG remainedfor SSP check,
F-print is performed to terminate the program without check.
entry REG and erase the data for check after completion of check.
Therefore SSP setting before check is not cleard.
If therefore there is no SSP entry REG remainedfor SSP check,
F-print is performed to terminate the program without check.
[9] Drawer open sensor test (For standard test)
1) Key operation
2) Functional description
State of the drawer open sensor is sensed and displayed.
3) Check items
X
Description
O
Drawer open sensor detected. (Drawer opend)
C
Drawer open sensor not detected. (Drawer closed)
a) Check opening of the specified drawer.
b) Check the display indication when the drawer is open and closed.
4) Test termination
Press any key. The test terminates with the test and message printed
[10] Drawer open sensor test (For remote drawer)
1) Key operation
2) Functional description
State of the drawer open sensor is sensed and displayed.
3) Check items
X
Description
O
Drawer open sensor detected. (Drawer opend)
C
Drawer open sensor not detected. (Drawer closed)
a) Check opening of the specified drawer.
b) Check the display indication when the drawer is open and closed.
4) Test termination
Press any key. The test terminates with the test and message printed
[11] Standard RAM test
1) Key operation
108
TL
1 0 8
109
TL
1 0 9
Normal end
Error
1 0 9
1 0 9
E-----
1 0 9
F-----
SSP table full
110
TL
1 1 0
X
1 1 0
111
TL
1 1 1
X
1 1 1
120
TL
5 – 4
Click on the first or last page to see other ER-A450S (serv.man5) service manuals if exist.