DV-RW360H (serv.man8). Pages 26-50 - Sharp DVD User Guide / Operation Manual. Page 9

34

EN

If the starting time is same:
•  The timer programming set first (PROG. 1) has 

priority.

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording 
is completed.

If programming has been made at the end of 
the programming (PROG. 1) currently being 
recorded:
•  The timer programming set first (PROG. 2) has 

priority. PROG. 3 will not be recorded.

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording 
is completed.

If the recording time is partially overlapped:
•  The timer programming with the earlier start 

time (PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is completed.

Additional 30 seconds (at the most) are cut off.

If the recording time entirely overlaps:
•  The shorter timer programming (PROG. 1) is not 

recorded.

•  If there is a power failure or the unit is unplugged for 

more than 1 hour, the clock setting and all timer settings 
will be lost.

•  If there is no disc or an unrecordable disc in the tray, the 

icon will flash and the timer recording will not occur. 

Insert a recordable disc.

•  If there is no tape or a tape with a record tab is not in 

the cassette compartment, the VCR indicator on the 
front panel flashes and the timer recording cannot be 
performed. Please insert a recordable tape.

•  When all timer recordings are complete, the 

icon 

flashes. To play back or eject the recorded disc, press 
[T-SET], and then press [PLAY B] or [OPEN/CLOSE 
EJECT A].

•  The timer recording cannot be performed in DVD and 

VCR at the same time. If you set two programmings with 
the same channel and time both in DVD and VCR, the 
programming that has priority will be recorded.

•  You cannot make any DVD operation during DVD timer 

recording.

•  You cannot make any VCR operation during VCR timer 

recording.

•  If the Start and End times are same, the length of the 

recording will be set for 24 hours. If the disc or tape 
becomes full during recording, the unit will turn itself 
off. To continue recording, press [T-SET] to cancel the 
timer-standby mode, insert a recordable disc or tape and 
press [T-SET] again.

•  If two or more programmes overlap, “Overlap” and the 

overlapped programme number will appear on the 
display.

•  If the Start time is earlier and the End time is later than 

the current time, the recording will start immediately 
after you press [T-SET].

•  If a videotape ends during the timer recording, the unit 

will automatically stop, eject the videotape, and turn 
itself off. To continue recording, insert a recordable tape.

•  If the recording time of two programmes overlap, or the End time of a programme and the Start time of 

another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent pro-
gramme are same:
•  If PROG. 1 is a DVD recorded programme, the 

beginning of PROG. 2 may be cut off.

*  If the cut off time exceeds 1 minute, the error number 

“E40” will appear in the Timer Programming list.

The first 30 seconds (at the most) are cut off.*

Priority of overlapped settings
The unit records programmes according to prior ity if the timer programmes overlap.