Read Sharp DV-RW360H (serv.man8) User Guide / Operation Manual online
36
EN
Recording
Satellite Link (cont’d)
Note
• If you have not set the clock, the clock setting window will appear at step 3. Follow to step 4 in “Clock
Setting” on page 22.
• You cannot set the End time for the Satellite Link Timer Recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during Satellite Link
• Recording picture will be distorted if the copy protection signal is being detected during Satellite Link
Timer Recording.
• When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those
recordings are recorded as illustrated below.
Example 2
Actual
Recording
Recording
Timer
Recording
Recording
Satellite Link
Example 3
Actual
Recording
Recording
Timer
Recording
Recording
Satellite Link
Example 1
Timer
Recording
Recording
Actual
Recording
Recording
Satellite Link
Settings for external equipment
Connection to external equipment
Connect the external equipment
using either the input terminals,
AV1, AV2, (Rear) or AV3 (Front).
However, for AV3 jacks, you
have to select S-INPUT or VIDEO
input jacks depending on the
connected devices.
Use a commercially available
Scart, S-Video or Video cable
and an Audio cable for this
connection.
using either the input terminals,
AV1, AV2, (Rear) or AV3 (Front).
However, for AV3 jacks, you
have to select S-INPUT or VIDEO
input jacks depending on the
connected devices.
Use a commercially available
Scart, S-Video or Video cable
and an Audio cable for this
connection.
1
In stop mode, press [SETUP].
2
Select “Required Setting”
using [Cursor K / L], then press
[ENTER].
using [Cursor K / L], then press
[ENTER].
Select Video
TV Aspect
Required Setting
4:3 Letter Box
Video In
DVD
VCR
3
Select “Select Video” using
[Cursor K / L], then press
[ENTER].
[Cursor K / L], then press
[ENTER].
Select Video - AV3 (Front)
S-Video In
Video In
DVD
VCR
4
Select the input jack type to be
used using [Cursor K / L], then
press [ENTER].
• If you want to use VIDEO input
used using [Cursor K / L], then
press [ENTER].
• If you want to use VIDEO input
jack (Composite), select “Video
In”.
In”.
• If you want to use S-INPUT jack,
select “S-Video In”.
5
Press [SETUP] to exit.
1
2
3
6
5
4
7
0
8
9
AUDIO
REPEAT
PAUSE
SEARCH
SLOW
MENU LIST
TOP MENU
STOP
PLAY
FWD
REV
SKIP
PROG.
CLEAR/C-RESET
VCR
REC/OTR
DVD
REC/OTR
PQRS
TUV
WXYZ
GHI
JKL
MNO
.@/:
ABC
DEF
SPACE
DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
VCR/DVD RECORDER
COMBINATION
NB203ED
RETURN
OPERATE
1
5
5
2
3
4
3
4
Click on the first or last page to see other DV-RW360H (serv.man8) service manuals if exist.