Read Sharp DV-RW360H (serv.man4) Service Manual online
1-11-3
E9B30TR
Yes
Yes
Yes
Yes
No
No
No
No
FLOW CHART NO.14
DVD-P-ON+12V is not outputted.
FLOW CHART NO.12
Replace Q1511.
No
Yes
Is the "L" pulse outputted to the collector of
Q1514?
Q1514?
Check Q1514 and PWR-SW line, and service it if
defective.
defective.
FLOW CHART NO.13
DVD-P-ON+5V is not outputted. (AL+5V is outputted normally.)
Is the "H" pulse inputted to the base of Q1510?
Replace Q1510.
Check R1531, R1532, R1710, R1711 and their
periphery, and service it if defective.
periphery, and service it if defective.
Yes
No
The fluorescent display tube does not light up.
Is 5V voltage supplied to Pin(13, 43) of IC612?
Is approximately -24V to -28V voltage supplied to
Pin(30) of IC612?
Pin(30) of IC612?
Is there approximately 500kHz oscillation to
Pin(5) of IC612?
Pin(5) of IC612?
Are the filament voltage applied between Pin(1)
and Pin(24) of the fluorescent display tube?
Also negative voltage applied between these pins
and GND?
and Pin(24) of the fluorescent display tube?
Also negative voltage applied between these pins
and GND?
Replace the fluorescent display tube (FL601).
Check the EV+5V line and service it if defective.
Check the -FL line and service it if defective.
Check R618, IC612 and their periphery, and
service it if defective.
service it if defective.
Check the power circuit, D1016, D1017,
R1040, R1041, C1018 and their periphery, and
service it if defective.
R1040, R1041, C1018 and their periphery, and
service it if defective.
No
Check D1031, L1013, C1037, C1039 and their
periphery, and service it if defective.
periphery, and service it if defective.
Is 12V voltage supplied to the emitter of Q1511?
Yes
No
Is 5V voltage supplied to Pin(1) of IC1505?
FLOW CHART NO.11
DVD-P-ON+3.3V is not outputted.
Replace IC1505.
Check D016, D1032, L013, C017, C018 and their
periphery, and service it if defective.
periphery, and service it if defective.
Yes
Click on the first or last page to see other DV-RW360H (serv.man4) service manuals if exist.