DV-RW360H (serv.man4). Pages 1-7-1 to 1-14-7 - Sharp DVD Service Manual (repair manual). Page 6

1-8-1

E9B30HIR

1. Turn the DVD recorder on.

2. Confirm that no disc is loaded or that the disc tray is

open. To put the DVD recorder into the Version
display mode, press [CM SKIP], [1], [2], and [3]
buttons on the remote control in that order.
Fig. a appears on the screen.

*******

*1: "*******" differs depending on the models.

*2: Firmware Version differs depending on the 
     models, and this indication is one example.

Fig. a  Version Display Mode Screen

3. Press [ENTER] button, then the DVD recorder starts

initializing. When the initializing is completed, the
DVD recorder exits the Version display mode and
turns off the power automatically.

* To move into the Normal mode from the Version

display mode, press [RETURN] button on the
remote control instead of [ENTER] button.

* When [OPERATE] button is pressed before

[ENTER] button is pressed, the DVD recorder exits
the Version display mode, then the power turns off.

To put the program back at the factory-default, initialize the DVD recorder & VCR as the following procedure.