Read Sharp DV-RW260H (serv.man9) Technical Bulletin online
DVD 2006 01 01
Date of Issue: 11
th
January 2006
Classification: White
DVD/VCR TECHNICAL BULLETIN
Page 1 of 2
Sharp Electronics (UK) Limited
Reference - AvW 10 01 2006 - 1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODEL
DVRW260H
SYMPTOM Cross talk on the menu screen or while in the DVD mode.
CAUSE
Interference from the RGB SCART input.
ACTION
Carry out the circuit change as indicated below:
1. Remove the 50mm lead wire on the print side of the VCR PWB (see picture on
page 2). This link may not be fitted on some PWB's.
2.
Change the position of resistors R8044, R8045 and R8046 (75ohm) to the bottom
of the SCART connector on the VCR PWB (see picture on page 2). These are the
RGB input signal terminating resistors.
of the SCART connector on the VCR PWB (see picture on page 2). These are the
RGB input signal terminating resistors.
Note
This change has been carried out from serial number
This change has been carried out from serial number
507917112.
New Location of RGB Terminating Resistors
DVD 2006 01 01
Date of Issue: 11
th
January 2006
Classification: White
DVD/VCR TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference - AvW 10 01 2006 - 1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Changes to the VCR PWB
Display
