Read Sharp DV-NC65H (serv.man29) User Guide / Operation Manual online
59
www.sharp.co.uk/support
Audio Output Mode
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
Hi-Fi STEREO SOUND
Stereo sound is possible from this Unit if you have a stereo TV
connected to the Unit with a scart lead, or audio equipment con-
nected with audio phono leads. The Unit is normally set so that
stereo sound is possible. The sound output from the Unit is
controlled by AUDIO OUTPUT. If you wish to change the sound
output you can use AUDIO OUTPUT as follows:
connected to the Unit with a scart lead, or audio equipment con-
nected with audio phono leads. The Unit is normally set so that
stereo sound is possible. The sound output from the Unit is
controlled by AUDIO OUTPUT. If you wish to change the sound
output you can use AUDIO OUTPUT as follows:
• Press AUDIO OUTPUT once. The LEFT audio channel will be sent
to BOTH speakers. will appear on the VCR Front Panel display.
• Press AUDIO OUTPUT again. The RIGHT audio channel will be
sent to BOTH speakers. will appear on the VCR Front Panel
display.
display.
• Press AUDIO OUTPUT a third time and the MONO track will be
sent to BOTH speakers. and will not appear on the VCR Front
Panel display.
Panel display.
• Pressing AUDIO OUTPUT a fourth time, normal Hi-Fi stereo sound
will be heard. and will appear on the VCR Front Panel display.
NICAM Hi-Fi STEREO SOUND
Your Unit can receive and record NICAM sound. The Unit is normally
set so that NICAM sound is possible if it is present on the receiving
signal, otherwise the Unit will automatically switch to receive the
mono signal. NICAM sound can be turned off. If you wish to do this
follow the procedure below:
set so that NICAM sound is possible if it is present on the receiving
signal, otherwise the Unit will automatically switch to receive the
mono signal. NICAM sound can be turned off. If you wish to do this
follow the procedure below:
1
Press VCR MENU to display the menu screen.
2
Press ' / " to select “MODE” then press SET to confirm.
• The MODE menu will be displayed with NICAM selected.
• The MODE menu will be displayed with NICAM selected.
3
Press \
\
\
\
\ / |
|
|
|
| to select “OFF”.
4
Press SET to confirm and return to the menu screen.
5
Press VCR MENU to exit to normal screen.
• If the tape being played back does not carry sound recorded on Hi-Fi
tracks, L and R will not appear on the display.
• lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality
may be improved by adjusting the tracking using CH ' / ".
• If the poor quality is for a long period the Unit will automatically select
the mono track and the sound will be in mono.
• NICAM sound may not be stereo.
NICAM
AUTO
OFF
COLOUR
AUTO
PAL
BLUE MUTE
AUTO
OFF
REPEAT ON
OFF
16:9
AUTO
OFF
SUPER.P
ON
OFF
:SELECT :CHANGE
SET :ENTER MENU:EXIT
SET :ENTER MENU:EXIT
DVNC65H054_062.pm6
30/8/02, 11:48 am
59
Click on the first or last page to see other DV-NC65H (serv.man29) service manuals if exist.