Read Sharp DV-NC65H (serv.man29) User Guide / Operation Manual online
63
www.sharp.co.uk/support
Immediate Recording
Selection of a Channel
Select the channel you wish to record by using the number buttons,
or select the next/previous channel by pressing CH ' / ".
To change between single digit and 2-digit channel numbers, press
- / --. For example, for channel 24, press - / -- then press 2 and 4.
or select the next/previous channel by pressing CH ' / ".
To change between single digit and 2-digit channel numbers, press
- / --. For example, for channel 24, press - / -- then press 2 and 4.
Tape Speed Selection
Your Unit has three tape speeds: SP (Standard Play), LP (Long Play)
and EP (Extended Play). Press TAPE SPEED to select the desired
setting.
It is recommended that EP recordings are only played back on the
Unit on which they were originally recorded.
You can record the channel you are watching or a different channel.
and EP (Extended Play). Press TAPE SPEED to select the desired
setting.
It is recommended that EP recordings are only played back on the
Unit on which they were originally recorded.
You can record the channel you are watching or a different channel.
Immediate Recording
1
Insert a video tape into your Unit.
2
Select the channel you wish to record on the Unit as above.
3
Press Æ
Æ
Æ
Æ
ÆREC to start recording.
4
Press âPAUSE/STILL to pause during recording.
5
Press Æ
Æ
Æ
Æ
ÆREC to continue recording.
6
Press ËSTOP once to stop recording.
Simple Timed Recording
1
Press Æ
Æ
Æ
Æ
ÆREC.
2
To specify a stop time, each additional press of Æ
Æ
Æ
Æ
ÆREC will delay
the stop time by 10 minutes.
3
Press ËSTOP once to stop recording at any time.
TV Program Recording
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
• If the tape ends before the recording is
complete the Unit will stop recording,
rewind, eject the tape and place the
Unit into STANDBY mode.
rewind, eject the tape and place the
Unit into STANDBY mode.
• If the Unit ejects the video tape when
you press Æ
Æ
Æ
Æ
ÆREC the tape is record
protected. i.e. record protection tab has
been removed.
been removed.
G STOP 15:30
E-240
CASSETTE
MODE
SP
(Standard Play)
240 min.
LP
(Long Play)
EP
(Extended Play)
480 min.
720 min.
DVNC65H063_070.pm6
30/8/02, 11:50 am
63
Click on the first or last page to see other DV-NC65H (serv.man29) service manuals if exist.