XL-UR27H - Sharp Audio User Guide / Operation Manual. Page 16

XL-UR27H

2008/July/18

XL-UR27H_UK&AUS

By using the direct search buttons, the desired tracks on the current disc can be
played.

A track number higher than the number of tracks on the disc cannot be selected.
During random play, direct search is not possible.

Repeat play can play one track, all tracks or a programmed sequence continuously.

To cancel repeat play:
Press the PLAY MODE button again until “ ” disappears.

The tracks on the disc can be played in random order automatically.

To cancel random play:
Press the PLAY MODE button. “RND” indicator will disappear.
Notes:

If you press the 

 button during random play, you can move to the track selected

next by the random operation. On the other hand, the 

 button does not allow

you to move to the previous track. The beginning of the track being played will be
located.
In random play, the unit will select and play tracks automatically. (You cannot
select the order of the tracks.)
After all track on the disc is played, the unit will stop automatically.

Caution:
After performing repeat play, be sure to press the   (CD  ) button. Otherwise, the
disc will play continuously.

Selected track number

The direct search buttons allow you to select up to number 9.

When selecting number 10 or higher, use the “+10” button.

1 Press the “+10” button once.

2 Press the “1” button.

3 Press the “3” button.

1 Press the “+10” button twice.

2 Press the “1” button.

3 Press the “3” button.

4 Press the “0” button.

To repeat one track:
Press the PLAY MODE button once. Press the   /   button.
To repeat all tracks:
Press the PLAY MODE button twice.  Press the   /   button.
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 17 and then press the 
PLAY MODE button once.  Press the   /   button.

To random play all tracks:
Press and hold down PLAY MODE button on the remote control for 3 seconds or 
more. Press the    /   button.