Read Sharp R-7N76M (serv.man11) Technical Bulletin online
Sharp Electronics (UK) Limited CE Technical Support Group
Originator
$Y:
Supervisor
Approval Date / / Reference TB-M9701028
White - Carry out as required Yellow - Carry out as required and whenever unit comes in for service Red - Carry out on all units
MWO970301
Month of Issue :
March 1997
Classification :
White
MICROWAVE TECHNICAL BULLETIN
Page 1 of 1
MODELS
R7N78M
SYMPTOM When the oven is used on the convection function, it does not reach the correct
pre-heat temperature.
Note that if the unit under test is within the specified limit at 250 C of +/-15 C
o
o
then no action is required.
CAUSE
Changes in component tolerances in the oven temperature sensing circuit.
ACTION
Change the value of R62 on the Control Panel to 1k8 ( was 2k7 ).
Use the part number given below.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
R62
Resistor 1k8, 0.25W
VRN-B12EK182F
AA
Display