XL-UR27H - Sharp Audio User Guide / Operation Manual. Page 17

XL-UR27H

2008/July/18

XL-UR27H_UK&AUS

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.

Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 5 to add tracks. The new
tracks will be stored after the last track of the previous programme.

To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the

 or 

 button.

MP3/WMA folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 19 to
select folder)

If the disc lid is opened, the programmed sequence will be
cancelled.
If you press the ON/STAND-BY button to enter the stand-by mode
or change the function from CD to another, the programmed
selections will be cleared.
During the programme operation, random play is not possible.

Selected track number

You can also select a track by pressing the 

 or 

 button.

Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
You can also check the programmed tracks by pressing the 
TUNING (  or  ) button.
If you make a mistake, the programmed tracks can be cleared 
by pressing the CLEAR/DIMMER button.

The total number in memory will
appear.

To clear the programmed selections:
Press the CLEAR/DIMMER button on the 
remote control whilst the “MEMORY” 
indicator is flashing.
Each time the button is pressed, one track will 
be cleared, beginning with the last track 
programmed.