Read Sharp XL-MP40H User Guide / Operation Manual online
05/2/8
XL-MP40H(E)3.fm
24
XL-MP40H
TINSEA052SJZZ
Adv
a
nced F
eatures
Timer and sleep operation (continued)
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
"
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SHIFT button and then the SLEEP button
until "OFF" appears on the display.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SHIFT button and then the SLEEP button
until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SHIFT button and then the SLEEP button once whilst the
sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Press the SHIFT button and then the SLEEP button once whilst the
sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts. However, when disc or tape play-
back time is one hour or less, it will enter the stand-by
mode after completing playback.
timer playback starts. However, when disc or tape play-
back time is one hour or less, it will enter the stand-by
mode after completing playback.
1
Play back the desired sound source.
2
Press the SHIFT button and then the
SLEEP button.
SLEEP button.
To change the sleep time:
Time decreases as follows each time they are pressed.
The amount of sleep time can also be changed whilst in the
sleep mode.
sleep mode.
(Maximum: 3 hours - Minimum: 5 minutes)
3
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will turn down 40 seconds before the sleep opera-
tion finishes.
tion finishes.
3:00
2:00
1:30
1:00
10
15
30
5
OFF
Click on the first or last page to see other XL-MP40H service manuals if exist.