Read Sharp XL-MP40H User Guide / Operation Manual online
05/2/8
XL-MP40H(E)3.fm
22
XL-MP40H
TINSEA052SJZZ
T
a
pe Rec
o
rding
Recording on a cassette tape (continued)
To perform programmed recording:
To stop recording:
Press the button.
Press the button.
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
button.
"
Recording from the radio
To stop recording:
Press the button.
Press the button.
To interrupt recording:
Press the
Press the
button.
To resume recording, press the
( ) button.
Beat cancel
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
Notes:
!
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
the AM loop aerial.
!
If you use the remote control, make sure to press the SHIFT but-
ton prior to pressing the
ton prior to pressing the
button.
"
Erasing recorded tapes
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
button.
1
Programme tracks (see page 17).
2
Press the
button.
3
Press the
( ) button to start recording.
1
Tune in to the desired station (see page 18).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the
( ) button to start recording.
1
Press the
button to pause recording.
2
Press the
button and select "TP REC A" or "TP REC B" for
better reception.
1
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
the side to be erased facing toward you.
2
Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
play.
When operating with the remote control, press the TAPE button.
3
Press the
button.
4
Press the
( ) button to start erasing.
Click on the first or last page to see other XL-MP40H service manuals if exist.