Read Sharp XL-MP40H User Guide / Operation Manual online
05/2/8
XL-MP40H(E)3.fm
21
XL-MP40H
TINSEA052SJZZ
T
a
pe Rec
o
rding
Recording on a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
!
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
malfunctions.
"
Recording from a disc
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent acciden-
tal recording or erasing.
!
To protect the recorded sound, re-
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
move the tab after recording. Cover
the tab hole with adhesive tape to
record on the tape without the tab.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
the display.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5
Press the
button.
!
Recording will be paused.
!
On the remote control, press the SHIFT button and then the
button.
6
Press the
( ) button to start recording.
!
Playback of the disc will start in a few seconds after the tape
starts.
starts.
!
When the playback of the disc is finished or the end of the
tape is reached, the disc and the cassette will stop automat-
ically.
tape is reached, the disc and the cassette will stop automat-
ically.
Side A
Tab for
side B
side B
Tab for
side A
side A
6
Click on the first or last page to see other XL-MP40H service manuals if exist.