Read Sharp XL-DAB227NH (serv.man2) User Guide / Operation Manual online
13
2008/July/30
XL-DAB227/257NH
XL-DAB227NH
XL-DAB257NH
XL-DAB257NH
Basic Operation
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
operation becomes erratic.
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
Test of the remote control
Check the remote control after checking all the connections (see
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Illumination light control
When the unit’s power is turned on, the ring around the volume
control lights up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2
seconds.
control lights up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2
seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
higher, the volume starts at 16 and fades in to the last set level.
0.2 m - 6 m
(8" - 20’)
Remote sensor
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Click on the first or last page to see other XL-DAB227NH (serv.man2) service manuals if exist.