XL-DAB227NH (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 11

 

2008/July/30

XL-DAB227/257NH

 

XL-DAB227NH
XL-DAB257NH

  

 

Connect the DAB/FM aerial wire to the DAB/FM socket and position
the DAB/FM aerial wire in the direction where the strongest signal
can be received.

 

Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.

  

 

Connect the black wire to the minus (–) terminal, and the red wire to
the plus (+) terminal.

  

 

The iPod with photo and video can be viewed by connecting to a TV/
monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket on the rear of the unit.

Note:
Please make sure to set iPod unit to either NTSC or PAL to match
your TV signal. Please visit Apple’s home page for further information.

Use speakers with an impedance of 4 ohms or more, as lower 
impedance speakers can damage the unit.
Do not mistake the right and the left 
channels. The right speaker is the one on the 
right side when you face the unit.
Do not let the bare speaker wires touch 
each other.
Do not allow any objects to fall into or to be 
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may 
be injured.

Red

Black

Video cable
(not supplied)

To video
input socket